https://community.ruckuswireless.com/t5/Wireless-Questions-and-Best/T710-Install-inside/m-p/32393#M1483 <P style="margin: 0;">Also I am unable to set it up inside. I have it powered and shows as 192.168.1.xx on my network, Can get to the log in screen and have tried factory reset but super/sp-admin doesn't work</P> <P style="margin: 0;"></P> Sat, 07 Aug 2021 20:11:26 GMT sudershan_gupta 2021-08-07T20:11:26Z https://community.ruckuswireless.com/t5/Wireless-Questions-and-Best/T710-Install-inside/m-p/32392#M1482 <P style="margin: 0;">I have 4 of&nbsp; R610's inside a ICF house scattered inside at 2 levels for coverage but still have issues&nbsp; getting them to function properly. Have dead zones with signal drops and equipment trying to move from one AP to other.&nbsp;</P> <P style="margin: 0;"></P> <P style="margin: 0;">I also have a t710 that i have not installed outside yet. Can I install it inside and what are the disadvantages of doing so?</P> <P style="margin: 0;">What are the ways where I can get seamless transition between my access points?</P> <P style="margin: 0;"></P> <P style="margin: 0;">Any help will be greatly appreciated.</P> Sat, 07 Aug 2021 17:49:57 GMT https://community.ruckuswireless.com/t5/Wireless-Questions-and-Best/T710-Install-inside/m-p/32392#M1482 sudershan_gupta 2021-08-07T17:49:57Z https://community.ruckuswireless.com/t5/Wireless-Questions-and-Best/T710-Install-inside/m-p/32393#M1483 <P style="margin: 0;">Also I am unable to set it up inside. I have it powered and shows as 192.168.1.xx on my network, Can get to the log in screen and have tried factory reset but super/sp-admin doesn't work</P> <P style="margin: 0;"></P> Sat, 07 Aug 2021 20:11:26 GMT https://community.ruckuswireless.com/t5/Wireless-Questions-and-Best/T710-Install-inside/m-p/32393#M1483 sudershan_gupta 2021-08-07T20:11:26Z https://community.ruckuswireless.com/t5/Wireless-Questions-and-Best/T710-Install-inside/m-p/32394#M1484 <P style="margin: 0;">How do I get access to T710? As after reset button on the device was pushed for more than 10 seconds. With the AP attached to my switch, I get the 192.168.1.xx with solid power light but blinking CTL light. With AP attached to my laptop, I get blinking power light with no ip address. Have not been able to get to set up. Any or all help will be greatly appreciated. thanks</P> Sat, 07 Aug 2021 21:58:35 GMT https://community.ruckuswireless.com/t5/Wireless-Questions-and-Best/T710-Install-inside/m-p/32394#M1484 sudershan_gupta 2021-08-07T21:58:35Z https://community.ruckuswireless.com/t5/Wireless-Questions-and-Best/T710-Install-inside/m-p/32395#M1485 <P style="margin: 0;">I am in. However now it states&nbsp;</P> <P style="margin: 0;"></P> <H3><SPAN>This AP is currently unable to provide wireless access.<BR />To resolve, connect to a Ruckus Controller.</SPAN><BR />To function as a standalone AP, go to<SPAN>&nbsp;</SPAN><A href="https://support.ruckuswireless.com/" target="blank">Ruckus Support</A>, navigate to the specific AP and download</H3> Sun, 08 Aug 2021 19:47:23 GMT https://community.ruckuswireless.com/t5/Wireless-Questions-and-Best/T710-Install-inside/m-p/32395#M1485 sudershan_gupta 2021-08-08T19:47:23Z