https://community.ruckuswireless.com/t5/Unleashed/Bonjour-Fencing/m-p/13420#M869 We're attempting to enable Bonjour Fencing via the CLI but not seeing the expected results.<BR alt="" name="" rel="" target="" title="" type="" value="" /><BR alt="" name="" rel="" target="" title="" type="" value="" />Case: We have two Unleashed APs at a physical building but are separated. One of those APs has three Apple TVs wirelessly connected it. The other AP does not have any Apple TV.<BR alt="" name="" rel="" target="" title="" type="" value="" /><BR alt="" name="" rel="" target="" title="" type="" value="" />Goal: Limit the Bonjour broadcast to only the single AP even though the SSID is broadcast between both APs.<BR alt="" name="" rel="" target="" title="" type="" value="" /><BR alt="" name="" rel="" target="" title="" type="" value="" />Action Taken: Enabled Bonjour Fence &amp; Rebooted APs but still seeing services broadcast<BR alt="" name="" rel="" target="" title="" type="" value="" /><BR alt="" name="" rel="" target="" title="" type="" value="" />Details: Created Fence. Then created rule. Source type set to "Wireless." Added _airplay._tcp. as service. Range set to "Same AP."<BR /><BR />Switch interfaces are in trunk mode. No bonjour gateway configured since same SSID &amp; subnet.<BR alt="" name="" rel="" target="" title="" type="" value="" /><BR alt="" name="" rel="" target="" title="" type="" value="" />What are we missing? Fri, 27 Sep 2019 19:23:56 GMT maverickmsp_772 2019-09-27T19:23:56Z https://community.ruckuswireless.com/t5/Unleashed/Bonjour-Fencing/m-p/13420#M869 We're attempting to enable Bonjour Fencing via the CLI but not seeing the expected results.<BR alt="" name="" rel="" target="" title="" type="" value="" /><BR alt="" name="" rel="" target="" title="" type="" value="" />Case: We have two Unleashed APs at a physical building but are separated. One of those APs has three Apple TVs wirelessly connected it. The other AP does not have any Apple TV.<BR alt="" name="" rel="" target="" title="" type="" value="" /><BR alt="" name="" rel="" target="" title="" type="" value="" />Goal: Limit the Bonjour broadcast to only the single AP even though the SSID is broadcast between both APs.<BR alt="" name="" rel="" target="" title="" type="" value="" /><BR alt="" name="" rel="" target="" title="" type="" value="" />Action Taken: Enabled Bonjour Fence &amp; Rebooted APs but still seeing services broadcast<BR alt="" name="" rel="" target="" title="" type="" value="" /><BR alt="" name="" rel="" target="" title="" type="" value="" />Details: Created Fence. Then created rule. Source type set to "Wireless." Added _airplay._tcp. as service. Range set to "Same AP."<BR /><BR />Switch interfaces are in trunk mode. No bonjour gateway configured since same SSID &amp; subnet.<BR alt="" name="" rel="" target="" title="" type="" value="" /><BR alt="" name="" rel="" target="" title="" type="" value="" />What are we missing? Fri, 27 Sep 2019 19:23:56 GMT https://community.ruckuswireless.com/t5/Unleashed/Bonjour-Fencing/m-p/13420#M869 maverickmsp_772 2019-09-27T19:23:56Z https://community.ruckuswireless.com/t5/Unleashed/Bonjour-Fencing/m-p/63902#M5295 <P>Did you ever set this up ?</P> Fri, 21 Jul 2023 03:23:58 GMT https://community.ruckuswireless.com/t5/Unleashed/Bonjour-Fencing/m-p/63902#M5295 adirburke 2023-07-21T03:23:58Z