Ruckus Unleashed AP 500 broadcasting mysterious 'configure me' SSID

filipe_serpa — Wed, 27 Sep 2017 07:09:15 GMT

I recently updated some unleashed 500's to latest firmware of 4.9.13.47 and I had an initial problem where the slave was in an infinite update cycle which I did fix eventually but that's not the first time that's happened.

The main problem is now the master 500 is broadcasting a mysterious SSID. Now I had this problem at another site where its broadcasting a configure me SSID but I couldn't work out how to get rid of it. last thing I want to do is a factory reset.

any one resolved this problem ?

Many Thanks

Filipe

Re: Ruckus Unleashed AP 500 broadcasting mysterious 'configure me' SSID

prado_prado — Wed, 27 Sep 2017 08:29:41 GMT

Hi Filipe,

Login to Master AP CLI and executed the below commands

ruckus>
ruckus>en
ruckus#debug
ruckus(debug)#remote_ap_cli –A set state wlan102 disable
ruckus(debug)#remote_ap_cli –A set state wlan103 disable
ruckus(debug)#quit

Note: Login into AP CLI and verify wlan 102 and wlan 103 are configure.me wlans.

Regards,
Prado

topic Ruckus Unleashed AP 500 broadcasting mysterious 'configure me' SSID in Unleashed

Ruckus Unleashed AP 500 broadcasting mysterious 'configure me' SSID

Re: Ruckus Unleashed AP 500 broadcasting mysterious 'configure me' SSID