https://community.ruckuswireless.com/t5/Unleashed/Time-delay-issues-When-connecting-a-new-AP-to-an-existing/m-p/12656#M800 you have 200.5.10.0.235.bl7 version on up and running network. correct?<BR />also on the AP which you are try to add to the network?? Wed, 14 Mar 2018 14:33:23 GMT monnat_systems 2018-03-14T14:33:23Z https://community.ruckuswireless.com/t5/Unleashed/Time-delay-issues-When-connecting-a-new-AP-to-an-existing/m-p/12654#M798 Please help me through the solution of this problem or related documents.<BR /><BR />I run the Unleashed network for practice.<BR />Master AP is used as ZoneFlex R720, slave and additional AP are using H510, H320 and so on.<BR /><BR />However, if you add a new AP to the unleashed network after the existing network configuration, the AP is automatically set and added to the network takes too long.<BR />(AP is in Factory-default state, time is more than 30 minutes, it takes several hours when it takes long time) Wed, 14 Mar 2018 07:05:56 GMT https://community.ruckuswireless.com/t5/Unleashed/Time-delay-issues-When-connecting-a-new-AP-to-an-existing/m-p/12654#M798 jong_ha_kim 2018-03-14T07:05:56Z https://community.ruckuswireless.com/t5/Unleashed/Time-delay-issues-When-connecting-a-new-AP-to-an-existing/m-p/12655#M799 i use firmware version&nbsp; 200.5.10.0.235.bl7 Wed, 14 Mar 2018 08:34:02 GMT https://community.ruckuswireless.com/t5/Unleashed/Time-delay-issues-When-connecting-a-new-AP-to-an-existing/m-p/12655#M799 jong_ha_kim 2018-03-14T08:34:02Z https://community.ruckuswireless.com/t5/Unleashed/Time-delay-issues-When-connecting-a-new-AP-to-an-existing/m-p/12656#M800 you have 200.5.10.0.235.bl7 version on up and running network. correct?<BR />also on the AP which you are try to add to the network?? Wed, 14 Mar 2018 14:33:23 GMT https://community.ruckuswireless.com/t5/Unleashed/Time-delay-issues-When-connecting-a-new-AP-to-an-existing/m-p/12656#M800 monnat_systems 2018-03-14T14:33:23Z