ruckus r750 master unleashed and running h350 on mesh

Intechsystems00 — Tue, 23 Jun 2026 04:19:05 GMT

Hello I am running r750 as master and i got h350 running on unleash for some reason they keep loosing heart beat I cant figure out why

ashish patel

909-322-7100

ashish@intechsytems.com

Re: ruckus r750 master unleashed and running h350 on mesh

Sunil_Acharya — Tue, 30 Jun 2026 05:08:32 GMT

Dear Ashish,

Greetings.

Thank you for reaching out regarding the heartbeat connectivity issue between your R750 (Master AP) and H350 APs.

Based on the Unleashed behavior, a “heartbeat loss” indicates that the member AP is intermittently unable to communicate with the Master AP over the network. When this occurs, the AP may temporarily disconnect and attempt to rejoin the cluster.

Possible Causes:

Layer 2 connectivity instability between APs
VLAN or management network mismatch between Master and Member AP
Network interruptions (packet loss, latency, or STP events)

Recommended Checks:

Verify both APs are on the same management VLAN and can ping each other consistently
Check switch configuration:
- VLAN tagging/untagging consistency
- No STP blocking or port flapping
Monitor switch port status for errors, drops, or link flaps

Next Steps:

If the issue persists,We request to create a support case via support portal and please share the following for further analysis:

AP support logs (Master and H350)
Switch port configuration and logs
Network topology diagram

We would be happy to review the logs and assist with identifying the exact root cause.

Best regards,
Sunil Acharya
Senior Technical Support Engineer
Ruckus Networks

topic Re: ruckus r750 master unleashed and running h350 on mesh in Unleashed

ruckus r750 master unleashed and running h350 on mesh

Re: ruckus r750 master unleashed and running h350 on mesh