How to enable DHCP option 82 on R770 Unleashed 200.19?

kelvin — Mon, 08 Jun 2026 05:33:56 GMT

I'm currently using an R770 with Unleashed firmware 200.19. There's no AC controller on-site, and I don't want to use Ruckus One cloud management; I only want to manage it locally using Unleashed. I need to use the DHCP Option 82 function with the switch to configure different SSIDs. However, I can't find this function setting in the Web GUI. In the CLI, `show wlan all` shows that DHCP Option 82 is present, but it's disabled. I've tried enabling it via command line in the CLI, but I can't find the relevant settings. How can I enable and use DHCP Option 82? I urgently need this function. I would greatly appreciate your help!

Re: How to enable DHCP option 82 on R770 Unleashed 200.19?

naresh_kumar_74 — Mon, 15 Jun 2026 08:34:24 GMT

Hello Kevin,

Thank you for reaching out to us.

DHCP Option 82 is not supported on Unleashed 200.19 — for the R770 or any other AP model.

DHCP Option 82 is a feature available only when the AP is managed by SmartZone (SZ) or R1, not in Unleashed mode.

To use DHCP Option 82 on the R770, you would need to manage it via SZ/R1 with firmware 7.1.1.520.830 or later.

Regards,

Naresh Kumar

| Staff Technical Support Engineer

topic Re: How to enable DHCP option 82 on R770 Unleashed 200.19? in Unleashed

How to enable DHCP option 82 on R770 Unleashed 200.19?

Re: How to enable DHCP option 82 on R770 Unleashed 200.19?