topic Re: Ruckus R370 in Unleashed

Ruckus R370

CIT — Fri, 27 Feb 2026 09:24:50 GMT

Hi,

I have a R370 with stand alone firmware which I would like to flash to Unleashed. There is no htttp or https service running and tying to use fw update via SSH tells me it cant find the ctrl file. Is it not possible to flash to Unleashed or am I missing something?

Thanks,

Sjaak

Re: Ruckus R370

Imran_ruckus — Wed, 04 Mar 2026 20:22:34 GMT

Hi @CIT

Greetings!!!

Thank you for reaching out to the RUCKUS Community Forums.

We appreciate your patience and understanding as we work to resolve the issues you are experiencing with your RUCKUS setup.

For the RUCKUS R370, conversion from standalone firmware to RUCKUS Unleashed is supported, but there are a few important points to clarify.

Why you're seeing the issue

1. No HTTP/HTTPS service running

In standalone firmware, the web server may be disabled.
You can verify this via CLI:

get http
get https

If disabled, enable with:

set http enable
set https enable
save

1. “Cannot find ctrl file” error via SSH

This usually happens when:
- The Unleashed firmware file is incomplete
- The .ctrl file is missing
- The image was not extracted properly
- Or the wrong firmware type was downloaded

Unleashed firmware packages contain both:

.bin
.ctrl

Both files must be present in the same directory when performing CLI upgrade.

Recommended Conversion Method (Best Practice)

For converting standalone >> Unleashed, the most reliable method is:

1. Download the correct R370 Unleashed firmware from the RUCKUS Support site.

2. Ensure both .bin and .ctrl files are present.

3. Use one of the following:

Option A – Web GUI (Preferred if HTTP/HTTPS is enabled)

Login to the standalone UI
Go to Maintenance >> Upgrade
Upload the Unleashed .bin file
Reboot after upgrade

Option B – TFTP Upgrade via CLI

If web access is unavailable:

fw update tftp <server-ip> <image-name>

Ensure:

TFTP server is reachable
Image file is in root directory
Firewall is not blocking

Important Note

Make sure:

The firmware is specifically labeled for R370 Unleashed
It is not a SmartZone or standalone image
The version supports conversion from your current standalone build

If you're still seeing the .ctrl file error, please share:

Current firmware version (get version)
Exact firmware file name you downloaded

I’ll help verify compatibility.

Thank you again.

Best regards,

Imran Sanadi

RUCKUS | Community Forums Support

Re: Ruckus R370

Imran_ruckus — Fri, 27 Feb 2026 19:36:39 GMT

Hi @CIT

Let us know the results and details shared in my previous post.

Thank you again.

Best regards,

Imran Sanadi

RUCKUS | Community Forums Support

Re: Ruckus R370

CIT — Sat, 28 Feb 2026 10:38:05 GMT

Thank you, Imran, enabling https did the trick

Thanks!

Sjaak

Re: Ruckus R370

Imran_ruckus — Mon, 02 Mar 2026 14:44:29 GMT

Hi @CIT

Thank you for your response.

That’s great to hear! I’m glad the issue has been resolved.

We truly appreciate your time and patience throughout this case.
Thank you once again for reaching out to the RUCKUS Community Forum. Should you have any further questions or need assistance in the future, please don’t hesitate to contact us.

Wishing you a wonderful day ahead!

Best regards,

Imran Sanadi

RUCKUS | Community Forums Support