Can you set the PVID on the outgoing port of an R770

keith_robertson — Sat, 10 Jan 2026 23:40:37 GMT

We have Ruckus R770s and use Unleashed to assign VLAN IDs to our different Wi-Fi networks. In the user interface, this setting is referred to as "Access VLAN," which is essentially similar to setting the PVID on a switch—forcing a VLAN ID onto all untagged traffic passing through a port. Incredibly useful.

The R770 also has an outgoing 1g eth port and it sure would be nice if I could set a PVID this port so that I don’t need another managed switch between my AP and the thing(s) that I’m connecting it to. Am I missing a setting in the UI or does this capability not exist?

Re: Can you set the PVID on the outgoing port of an R770

Mayank — Mon, 26 Jan 2026 11:07:39 GMT

Hi Keith,

Thank you for posting your query,

I understand that you would like to configure a PVID / Access VLAN on the secondary Ethernet port of the R770 in an Unleashed environment, so that wired devices connected to this port are placed into a specific VLAN without requiring an additional managed switch. You are checking whether this capability is supported.

For your reference, please find below the official documentation that explains how the Ethernet port on an Unleashed-managed AP can be configured in Access mode, where untagged traffic is assigned to a specific VLAN (similar to a PVID on a switch):

https://docs.commscope.com/bundle/unleashed-200.18-onlinehelp/page/GUID-9D7EA500-E907-46E6-941D-0DCEE1324318.html

This document details the LAN Port Profile / Ethernet Port Type configuration available in Unleashed.

Please feel free to leave us a message if you have any concerns

Thanks
Kind regards,
Mayank Meena
RUCKUS Technical Support

topic Can you set the PVID on the outgoing port of an R770 in Unleashed

Can you set the PVID on the outgoing port of an R770

Re: Can you set the PVID on the outgoing port of an R770