How to Configure Persistent Per-AP Ethernet Port VLAN Settings in Unleashed?

luditte — Mon, 29 Dec 2025 23:31:07 GMT

Hello,

I'm running Ruckus Unleashed with multiple R710 APs in a multi-VLAN environment. I need to configure eth1 on different APs with different VLAN assignments in access mode:

Upstairs AP: eth1 as access port, untagged VLAN 30
Downstairs AP: eth1 as access port, untagged VLAN 5

The Problem: After power cycles, the ethernet port configurations revert to trunk mode. I have to SSH directly into each AP and manually run:

set interface eth1 type access untag <VLAN>

This works temporarily but doesn't persist through reboots.

What I've Tried:

Via Unleashed master CLI: config → ap <MAC> → port-setting returns error: "The model could not be configured in unleashed"
Web GUI: Cannot find "Ethernet Port Settings" or equivalent in the current Unleashed version
Checked ap-group, ap-policy, and system configuration contexts - no ethernet port options found

Questions:

Is per-AP ethernet port configuration supported in Unleashed, or is this a ZoneDirector/SmartZone-only feature?
What is the proper method to configure and persist per-AP ethernet port VLAN settings in Unleashed?
If not supported via the master, is there a configuration file or method to make SSH-configured port settings persistent?

Environment:

Ruckus Unleashed (latest version)
Ruckus R710 Access Points
Multi-VLAN network with VLANs 5, 30, and others

Thank you for your assistance.

Re: How to Configure Persistent Per-AP Ethernet Port VLAN Settings in Unleashed?

luditte — Fri, 23 Jan 2026 21:43:32 GMT

Still looking for a way to do this.. Does anyone have a suggestion?

topic How to Configure Persistent Per-AP Ethernet Port VLAN Settings in Unleashed? in Unleashed

How to Configure Persistent Per-AP Ethernet Port VLAN Settings in Unleashed?

Re: How to Configure Persistent Per-AP Ethernet Port VLAN Settings in Unleashed?