topic Re: Unleashed 200.18.7.1.302 issue. in Unleashed

Unleashed 200.18.7.1.302 issue.

biniyi — Mon, 02 Jun 2025 11:54:20 GMT

When R850 upgrade to Unleashed 200.18.7.1.302 from 200.17.7.0.152. then some 2.4G smart home device will be officeline (2.4G & 5G is same SSID, and with 30+ smart home deivce, Most of them are 2.4G devices.) . If downgrade to version 200.17.7.0.152, no this issue.

Re: Unleashed 200.18.7.1.302 issue.

sanjay_kumar — Tue, 03 Jun 2025 04:35:30 GMT

@biniyi,

If the product has support warranty, could you please raise a support case on this.
I might need some additional data to see the issue.

If not, let me know so that I can guide you to collect the necessary logs.

Re: Unleashed 200.18.7.1.302 issue.

RUCSAK1 — Wed, 11 Jun 2025 01:15:18 GMT

Try Enabling WPA2 and WPA3, I had this issue on the 5ghz, it was some devices not supporting WPA3, and needing WPA2, but I had that turned off. When I enabled WPA2 (made it the same password as WPA3 so I would not have to enter new passwords for everything) it all worked. I have no idea on why 200.16 it worked, and in 200.17 it didn't - but something for sure changed with how WPA2 and WPA3 support is designed. In my case the manufacture (Control4) said there was never any support for WPA3 for their remotes, but I had them working perfect with ONLY WPA3 enabled on SSIDs. Hopefully this helps you. Wondering if this is also your issue. They said this specific issue was fixed in 200.18 - but I have not tested to confirm, I left my config with WPA2 and WPA3 on.

Re: Unleashed 200.18.7.1.302 issue.

biniyi — Tue, 09 Sep 2025 14:17:03 GMT

@sanjay_kumar @RUCSAK1, Thanks for your help！ Yes, the problem has gone after only enable WPA2. Thank you! However, I can't figure out why the 200.17 version doesn't have this issue. Anyway, I'll solve it by enabling only WPA2 authentication for 200.18 new version firmware.