R610 2.4GHz Unstable

fortymarlin — Mon, 08 Sep 2025 06:10:43 GMT

Hi,

Setup a Ruckus R610 with Unleashed initially I had the latest firmware version and my 2.4GHz band was constantly resetting and bringing down all my SSIDs, I went back to an older version (200.14.6.1.203) and it seemed OK until I restarted the AP and now the 2.4GHz is very unstable again, with this showing in the logs:

Sep 8 07:05:03 Ruckus-R610 ZD-APMgr: IPC_thread rcv ping from TACMON
Sep 8 07:05:01 Ruckus-R610 kernel: [48302.769785] FWLOG: [49392031] WAL DEV reset, wifi0 rx 1, tx 1, reset =1 reason 2
Sep 8 07:05:01 Ruckus-R610 kernel: [48302.769768] FWLOG: [49392012] WAL TX timeout wifi0 sig=fa33 txq 0 7 1 3
Sep 8 07:05:00 Ruckus-R610 kernel: [48301.768323] FWLOG: [49390879] WAL DEV reset, wifi0 rx 1, tx 1, reset =1 reason 2
Sep 8 07:05:00 Ruckus-R610 kernel: [48301.768307] FWLOG: [49390860] WAL TX timeout wifi0 sig=fa33 txq 0 7 1 3
Sep 8 07:04:59 Ruckus-R610 kernel: [48300.766904] FWLOG: [49389727] WAL DEV reset, wifi0 rx 1, tx 1, reset =1 reason 2
Sep 8 07:04:59 Ruckus-R610 kernel: [48300.766886] FWLOG: [49389708] WAL TX timeout wifi0 sig=fa33 txq 0 7 1 3
Sep 8 07:04:57 Ruckus-R610 kernel: [48298.763915] FWLOG: [49388575] WAL DEV reset, wifi0 rx 1, tx 1, reset =1 reason 2
Sep 8 07:04:57 Ruckus-R610 kernel: [48298.763897] FWLOG: [49388557] WAL TX timeout wifi0 sig=fa33 txq 0 7 1 3
Sep 8 07:04:56 Ruckus-R610 kernel: [48297.762420] FWLOG: [49387423] WAL DEV reset, wifi0 rx 1, tx 1, reset =1 reason 2
Sep 8 07:04:56 Ruckus-R610 kernel: [48297.762403] FWLOG: [49387405] WAL TX timeout wifi0 sig=fa33 txq 0 7 1 3
Sep 8 07:04:55 Ruckus-R610 kernel: [48296.760692] FWLOG: [49386271] WAL DEV reset, wifi0 rx 1, tx 1, reset =1 reason 2
Sep 8 07:04:55 Ruckus-R610 kernel: [48296.760674] FWLOG: [49386253] WAL TX timeout wifi0 sig=fa33 txq 0 7 1 3
Sep 8 07:04:54 Ruckus-R610 kernel: [48295.759287] FWLOG: [49385119] WAL DEV reset, wifi0 rx 1, tx 1, reset =1 reason 2
Sep 8 07:04:54 Ruckus-R610 kernel: [48295.759270] FWLOG: [49385101] WAL TX timeout wifi0 sig=fa33 txq 0 7 1 3
Sep 8 07:04:53 Ruckus-R610 kernel: [48294.757501] FWLOG: [49383968] WAL DEV reset, wifi0 rx 1, tx 1, reset =1 reason 2
Sep 8 07:04:53 Ruckus-R610 kernel: [48294.757483] FWLOG: [49383950] WAL TX timeout wifi0 sig=fa33 txq 0 7 1 3
Sep 8 07:04:52 Ruckus-R610 kernel: [48293.756040] FWLOG: [49382816] WAL DEV reset, wifi0 rx 1, tx 1, reset =1 reason 2
Sep 8 07:04:52 Ruckus-R610 kernel: [48293.756023] FWLOG: [49382798] WAL TX timeout wifi0 sig=fa33 txq 0 7 1 3
Sep 8 07:04:51 Ruckus-R610 kernel: [48292.754416] FWLOG: [49381664] WAL DEV reset, wifi0 rx 1, tx 1, reset =1 reason 2
Sep 8 07:04:51 Ruckus-R610 kernel: [48292.754399] FWLOG: [49381646] WAL TX timeout wifi0 sig=fa33 txq 0 7 1 3
Sep 8 07:04:50 Ruckus-R610 kernel: [48291.752939] FWLOG: [49380513] WAL DEV reset, wifi0 rx 1, tx 1, reset =1 reason 2
Sep 8 07:04:50 Ruckus-R610 kernel: [48291.752920] FWLOG: [49380494] WAL TX timeout wifi0 sig=fa33 txq 0 7 1 3
Sep 8 07:04:48 Ruckus-R610 kernel: [48289.749728] FWLOG: [49379361] WAL DEV reset, wifi0 rx 1, tx 1, reset =1 reason 2
Sep 8 07:04:48 Ruckus-R610 kernel: [48289.749711] FWLOG: [49379342] WAL TX timeout wifi0 sig=fa33 txq 0 7 1 3
Sep 8 07:04:48 Ruckus-R610 syslog: upgrade_debug: pid=16514, insert_field_to_upgrade_ap_list(): upgrade ap list all done!
Sep 8 07:04:48 Ruckus-R610 syslog: upgrade_debug: pid=16514, insert_field_to_upgrade_ap_list(): update the version field of upgrade ap list node done!
Sep 8 07:04:48 Ruckus-R610 syslog: upgrade_debug: pid=16514, insert_field_to_upgrade_ap_list(): target_version_str = 200.14.6.1.203!
Sep 8 07:04:48 Ruckus-R610 syslog: upgrade_debug: pid=16514, insert_field_to_upgrade_ap_list(): backup_ver = 200.15.6.212.27!
Sep 8 07:04:48 Ruckus-R610 syslog: upgrade_debug: pid=16514, insert_field_to_upgrade_ap_list(): active_ver = 200.14.6.1.203!
Sep 8 07:04:48 Ruckus-R610 syslog: upgrade_debug: pid=16514, insert_field_to_upgrade_ap_list(): upgrade_state = !
Sep 8 07:04:48 Ruckus-R610 syslog: upgrade_debug: pid=16514, insert_field_to_upgrade_ap_list(): version_match = 0!
Sep 8 07:04:48 Ruckus-R610 syslog: upgrade_debug: pid=16514, insert_field_to_upgrade_ap_list(): imghdr.product = !
Sep 8 07:04:48 Ruckus-R610 syslog: upgrade_debug: pid=16514, insert_field_to_upgrade_ap_list(): imghdr.version = !
Sep 8 07:04:48 Ruckus-R610 syslog: upgrade_debug: pid=16514, insert_field_to_upgrade_ap_list(): firmware_file open failure
Sep 8 07:04:48 Ruckus-R610 syslog: upgrade_debug: pid=16514, insert_field_to_upgrade_ap_list(): curr_version_str = 200.14.6.1.203!
Sep 8 07:04:48 Ruckus-R610 syslog: upgrade_debug: pid=16514, insert_field_to_upgrade_ap_list(): target_version_str = 200.14.6.1.203!
Sep 8 07:04:48 Ruckus-R610 syslog: upgrade_debug: pid=16514, insert_field_to_upgrade_ap_list(): upgrade_model_name = r710!
Sep 8 07:04:48 Ruckus-R610 syslog: upgrade_debug: pid=16514, insert_field_to_upgrade_ap_list(): target_version_str = 200.14.6.1.203!
Sep 8 07:04:48 Ruckus-R610 syslog: upgrade_debug: pid=16514, insert_field_to_upgrade_ap_list(): curr_version_str=[200.14.6.1.203]
Sep 8 07:04:48 Ruckus-R610 syslog: upgrade_debug: pid=16514, insert_field_to_upgrade_ap_list(): merge the election ap list to upgrade ap list done!
Sep 8 07:04:48 Ruckus-R610 syslog: upgrade_debug: pid=16514, insert_field_to_upgrade_ap_list(): remove the vap firmware cluster done!
Sep 8 07:04:48 Ruckus-R610 syslog: upgrade_debug: pid=16514, insert_field_to_upgrade_ap_list(): remove the firmware cluster that have no any ap node done!
Sep 8 07:04:48 Ruckus-R610 syslog: upgrade_debug: pid=16514, insert_field_to_upgrade_ap_list(): special handle the M510 node from upgrade_ap_list done!
Sep 8 07:04:48 Ruckus-R610 syslog: upgrade_debug: pid=16514, insert_field_to_upgrade_ap_list(): remove the ap node that do not approved in ap_list from upgrade_ap_list done!
Sep 8 07:04:48 Ruckus-R610 syslog: upgrade_debug: pid=16514, insert_field_to_upgrade_ap_list(): remove the ap node of upgrade_ap_list that do not exist in upgrade_ap_list_from_election done!
Sep 8 07:04:48 Ruckus-R610 syslog: upgrade_debug: pid=16514, insert_field_to_upgrade_ap_list(): ap_node_find = 1!
Sep 8 07:04:48 Ruckus-R610 syslog: upgrade_debug: pid=16514, insert_field_to_upgrade_ap_list(): merge all ap from election to upgrade ap list done!
Sep 8 07:04:48 Ruckus-R610 syslog: upgrade_debug: pid=16514, insert_field_to_upgrade_ap_list(): update ap 60:d0:2c:0a:66:e0 attributes from election to upgrade ap list!
Sep 8 07:04:48 Ruckus-R610 syslog: upgrade_debug: pid=16514, insert_field_to_upgrade_ap_list(): add all models from election to upgrade ap list done!
Sep 8 07:04:48 Ruckus-R610 syslog: upgrade_debug: pid=16514, insert_field_to_upgrade_ap_list(): update time stamp to each ap node done!
Sep 8 07:04:48 Ruckus-R610 syslog: upgrade_debug: pid=16514, insert_field_to_upgrade_ap_list(): now = 1757311488!
Sep 8 07:04:48 Ruckus-R610 syslog: upgrade_debug: pid=16514, insert_field_to_upgrade_ap_list(): is_system_upgrading = 0!
Sep 8 07:04:48 Ruckus-R610 syslog: upgrade_debug: pid=16514, get_ap_list(): see [/tmp/unleashed_upgrade/upgrade_ap_list_from_election.xml.ready], ap-list ready!
Sep 8 07:04:48 Ruckus-R610 syslog: upgrade_debug: pid=16514, get_ap_list(): ap-list loop 0.
Sep 8 07:04:47 Ruckus-R610 kernel: [48288.748237] FWLOG: [49378209] WAL DEV reset, wifi0 rx 1, tx 1, reset =1 reason 2
Sep 8 07:04:47 Ruckus-R610 kernel: [48288.748221] FWLOG: [49378190] WAL TX timeout wifi0 sig=fa33 txq 0 7 1 3
Sep 8 07:04:46 Ruckus-R610 kernel: [48287.746505] FWLOG: [49377112] WAL DEV reset, wifi0 rx 1, tx 1, reset =1 reason 2
Sep 8 07:04:46 Ruckus-R610 kernel: [48287.746494] FWLOG: [49377094] WAL TX timeout wifi0 sig=fa33 txq 4 4 1 3
Sep 8 07:04:46 Ruckus-R610 kernel: [48287.746481] FWLOG: [49376429] WAL DEV reset, wifi0 rx 1, tx 1, reset =1 reason 2
Sep 8 07:04:46 Ruckus-R610 kernel: [48287.746464] FWLOG: [49376410] WAL TX timeout wifi0 sig=fa33 txq 0 7 1 3

Thanks.

Re: R610 2.4GHz Unstable

Mayank — Mon, 08 Sep 2025 14:56:20 GMT

Hi fortymarlin,

Thank you for posting your query!

I understand that you're experiencing instability with the R610 2.4GHz band.

Please try the following troubleshooting steps and let me know if they help:

Temporarily disable the 5GHz band to see if the instability persists on the 2.4GHz band alone.

Create an open SSID and check if the issue occurs on that network.

For testing purpose If the issue continues, please take a backup of your configuration, then perform a factory reset on the access point. After that, re-flash the firmware and reapply your configuration.

If the problem is still not resolved, please log a ticket using the link below, and we will assist you further:

https://support.ruckuswireless.com/contact-us

I hope this information is helpful. If you have any concerns, please feel free to reach out.

Note: If this solution addresses your query, please consider marking this post as "Accepted Solution."

Thank you!

Mayank

topic R610 2.4GHz Unstable in Unleashed

R610 2.4GHz Unstable

Re: R610 2.4GHz Unstable