topic bss-minrate command isn't changing the basic rate set in Unleased 200.18.x firmware in Unleashed

bss-minrate command isn't changing the basic rate set in Unleased 200.18.x firmware

Devinator — Fri, 18 Jul 2025 22:59:52 GMT

I've configured three SSIDs, one per band (2.4G, 5G, 6G), and for each SSID I have the bss-minrate configured for 24M. The AP radios are still announcing the basic rate set as default (2.4G = 1, 2, 5.5, 6, 9, 11, 12, 24) (5G = 6, 12, 24), (6G = 6, 12, 24). I'm using WiFi Explorer Pro to see this, but of course WireShark shows the same. Has anyone else run into this? Is there something I'm missing? Thanks!

Re: bss-minrate command isn't changing the basic rate set in Unleased 200.18.x firmware

Rohit_W — Mon, 21 Jul 2025 08:44:42 GMT

Hi Devinator,

Could you please share the output of below command from the AP CLI:

1. Enter the ap mode using #ap-mode.
2. Check the WLAN list using #get wlanlist. Note the WLAN number against the SSID.

3. Check the bss min-rate for the WLAN using #get bss-minrate <wlan no> ex:get bss-minrate wlan64.