topic Default super password after factory reset for unleashed configuration in Unleashed

Default super password after factory reset for unleashed configuration

dmytro_savin — Wed, 13 Jun 2018 23:22:12 GMT

What is username/password afrer factory reset . Super/sp-admin does not work for unleashed firmware

Re: Default super password after factory reset for unleashed configuration

fred_bred — Thu, 14 Jun 2018 15:41:11 GMT

try super as lowercase

Re: Default super password after factory reset for unleashed configuration

michael_brado — Fri, 15 Jun 2018 20:18:20 GMT

Repeating from another thread:
Unleashed initial configuration needs to be done using the APs default SSID, then browsing
to https://unleashed.ruckuswireless.com when you'll be prompted to create the network and
define your Admin credentials. Setup is described in this knowledge base article for your
assistance:
https://support.ruckuswireless.com/answers/000005204

If you don't see a Configure.Me-XXYYZZ ssid in the air after factory defaulting your AP,
I suspect that they are not running Unleashed code. Then you need the direct AP to PC(pre-configured with 192.168.0.x ) so you can access https://192.168.0.1 (super/sp-admin)and upgrade to your AP model Unleashed code.I just posted a new Unleashed 200.6.10.1.308 btw...

Re: Default super password after factory reset for unleashed configuration

JacksonCampbell — Sat, 15 Jul 2023 09:05:30 GMT

Unleashed also can be accessed and setup via 192.168.0.1. If default credentials aren't working for a ZoneFlex AP then it should be checked if there were previous credentials cached for the IP address (https://support.ruckuswireless.com/articles/000001909).