how to set different ssid on 3 R320 ap

wanji — Thu, 20 Feb 2025 22:03:20 GMT

hi...i am using 3 ap R320...using same vlan dhcp...using standalone firmware...but when i set different ssid...it only show 1 ssid only...how to setup 3 different ssid ya ??want to set the is name is ruckus-01...ruckus-02...ruckus-03...but appeared ruckus-01...pls help with this master..can disable it ?

Re: how to set different ssid on 3 R320 ap

simon_louis — Tue, 29 Apr 2025 12:34:30 GMT

Hi Wanji,

Could you please login to the AP CLI and get the output of command get wlanlist.

From the Web UI of these 3 AP's did you check if you have named the wireless lans as per your requirement and did you save them?

Also, you can run the below command to enable or disable the wlans.

state : set state <wlan name> {up|down}
-- Set state of wlan interface

Regards,

Simon Louis

topic how to set different ssid on 3 R320 ap in Unleashed

how to set different ssid on 3 R320 ap

Re: how to set different ssid on 3 R320 ap