topic Re: UAPSD mode un Unleashed in Unleashed

UAPSD mode un Unleashed

modernmovement — Wed, 04 Dec 2024 20:41:20 GMT

Hi all, I have an issue with devices that go offline. The supplier of those devices advices me to look at power management related settings. Especially UAPSD.

The devices don't use wifi a lot, and they might be disconnected from the wlan is their suggestion.

There is nothing in the Ruckus Unleashed UI related, and a search on the forum also doesn't help me much.

I've bought 2 R500 AP's with 100.7 some time ago, but there is no support contract.
I hope someone here can help me out.

Thanks!

Re: UAPSD mode un Unleashed

sanjay_kumar — Thu, 05 Dec 2024 05:38:56 GMT

Hi,

Ruckus has WMM and U-APSD (which is essentially WMM Power Save) are enabled by default.

Refer below link and check page number 21 on U-APSD details.

https://support.ruckuswireless.com/documents/2339-best-practice-design-guide-deploying-voice-over-ip-for-wi-fi

Re: UAPSD mode un Unleashed

modernmovement — Thu, 05 Dec 2024 14:00:47 GMT

Hi Sanjay,

thanks, that's a nice explanation.
Do you also have some information on how to disable this?

Best,

Leon

Re: UAPSD mode un Unleashed

sanjay_kumar — Fri, 06 Dec 2024 07:46:40 GMT

Hi

U-APSD will be enabled by default in the controller and there is no configuration in the controller to disable U-APSD as this is a necessary function for the power save.

Re: UAPSD mode un Unleashed

modernmovement — Fri, 06 Dec 2024 16:37:09 GMT

I see. And is there any general setting to prevent U-APSD to be disable by any means? Like disabling power save system wide, or maybe set some sort of high priority flag or anything related?

If this is not possible, I would have to look out for a different vendor for these setups.