https://community.ruckuswireless.com/t5/Unleashed/clients-have-to-rejoin-networks-after-unleashed-update/m-p/94622#M6365 <P>We previously updated our unleashed firmware version from&nbsp;200.14.6.1.199 to&nbsp;200.15.6.12.304 on our fleet of 27 R550 ans 2 R510s.</P><P>&nbsp;</P><P>The upgrade worked fine but all of the clients were then forced to re-enter the passwords for the correct SSIDs even though they were previously stored correctly..&nbsp; This caused havok with our fleet or AIV robots, guests with valid vouchers and 75+ wirelessly connected staff so we had to revert to the previous firmware version.&nbsp; Now that version&nbsp;200 16.7.0.325 is available we are rather skittish about upgrading in case the same happens.&nbsp; Is there anything we can do to prevent this or was it a bug on the version we last tried?</P> Wed, 07 Aug 2024 13:13:35 GMT DMUK-IS 2024-08-07T13:13:35Z https://community.ruckuswireless.com/t5/Unleashed/clients-have-to-rejoin-networks-after-unleashed-update/m-p/94622#M6365 <P>We previously updated our unleashed firmware version from&nbsp;200.14.6.1.199 to&nbsp;200.15.6.12.304 on our fleet of 27 R550 ans 2 R510s.</P><P>&nbsp;</P><P>The upgrade worked fine but all of the clients were then forced to re-enter the passwords for the correct SSIDs even though they were previously stored correctly..&nbsp; This caused havok with our fleet or AIV robots, guests with valid vouchers and 75+ wirelessly connected staff so we had to revert to the previous firmware version.&nbsp; Now that version&nbsp;200 16.7.0.325 is available we are rather skittish about upgrading in case the same happens.&nbsp; Is there anything we can do to prevent this or was it a bug on the version we last tried?</P> Wed, 07 Aug 2024 13:13:35 GMT https://community.ruckuswireless.com/t5/Unleashed/clients-have-to-rejoin-networks-after-unleashed-update/m-p/94622#M6365 DMUK-IS 2024-08-07T13:13:35Z