topic Re: How to correctly reconnect the failed ap under unleashed? in Unleashed

How to correctly reconnect the failed ap under unleashed?

zlinuxboy — Fri, 05 Jan 2024 06:38:32 GMT

hi, community.

I have a unleashed built by two R600s. R600-1 is the master, accessident lost the power. R600-2 take the master role over, and I did some config modified and work a well. after couple hours I found the issue and reconnect the R600-1 back, but problem occur: R600-1take over the master role back, and the modifed config didn't inhereted from the R600-2.

so, how to correctly reconnect the preview master ap back again?

Re: How to correctly reconnect the failed ap under unleashed?

zlinuxboy — Fri, 05 Jan 2024 06:55:06 GMT

even after I unplug the R600-1, R600-2 take over the master, but the modified config is still lost.

Re: How to correctly reconnect the failed ap under unleashed?

syamantakomer — Wed, 10 Jan 2024 18:30:48 GMT

Hi @zlinuxboy,

You may have to reset all the APs and setup it from the scratch.

Here is a self-help article which will help you.

https://community.ruckuswireless.com/t5/RUCKUS-Self-Help/How-to-reset-entire-Unleashed-network-for-reconfiguration-or/m-p/34759#M35