topic R610 unleashed vlan eth1 in Unleashed

R610 unleashed vlan eth1

Kevinc — Wed, 29 Nov 2023 11:18:09 GMT

I have two R610s at the house running unleashed.

I can ssh in and run command "set interface eth1 type access untag 76" to do what I want, just looking to have it done automatically.

I see some options that can do this for some models, in the specific model controls for the H320 for instance. But that is not an option for R610.

Is there a way to configure boot scripts to do it on the device? Or any other way to do so?

Re: R610 unleashed vlan eth1

syamantakomer — Wed, 29 Nov 2023 19:29:34 GMT

Hi @Kevinc,

VLAN configuration for secondary eth ports is not supported for all AP models. Only specific AP models with multiple ports like our H series APs supports it.

Re: R610 unleashed vlan eth1

Kevinc — Wed, 29 Nov 2023 19:32:27 GMT

The CLI config option works, so it seems like this model can support it if you choose to add it.

Are there any on-device script methods of setting it after boot?

Re: R610 unleashed vlan eth1

syamantakomer — Wed, 29 Nov 2023 19:36:46 GMT

Unfortunatly, Unleashed doesn't support scripting. However, you can do it from CLI, but I don't think configuration will survive a reboot.

Re: R610 unleashed vlan eth1

justauser — Fri, 23 Feb 2024 19:31:23 GMT

Hello, what is the commandline option for tagging a port with a VLAN ID on the R610/R510?

Re: R610 unleashed vlan eth1

Kevinc — Fri, 23 Feb 2024 23:30:16 GMT

set interface eth1 type access untag 7

Re: R610 unleashed vlan eth1

syamantakomer — Fri, 22 Mar 2024 18:07:43 GMT

Hello,

As mentioned earlier, even if you tag the VLAN using CLI, configuration will not survive.