topic Re: Removing WLAN that was created in error in Unleashed

Removing WLAN that was created in error

Lennar_Saechao — Tue, 14 Feb 2023 23:59:02 GMT

When I was setting up the R510 AP for the first time, I did something where I ended up broadcasting a SSID that I no longer want.

Is there anyway to delete this ssid or at least hide it? I looked all over my network setup and cannot find it to make any changes to it.

Re: Removing WLAN that was created in error

Ayush_Tripathi — Wed, 15 Feb 2023 08:26:18 GMT

Hello,

To delete the WLAN in Unleashed , open the Wi-Fi Networks section, select the WLAN box from the list on the left side click on More option and disable or delete the WLAN.

If you are using the AP in standalone mode, please refer the below document.

https://docs.commscope.com/bundle/ap-110.0-indooruserguide/page/GUID-1B9D0FF5-A00C-4421-A50D-A212B48B3811.html

You need to select the Configuration>>Select the Radio (2.4ghz or 5ghz) >>disable the broadcast SSID option.

Re: Removing WLAN that was created in error

Lennar_Saechao — Wed, 15 Feb 2023 17:05:11 GMT

I can see the two that I have created for upstairs and downstairs that works as expected, but the one I am looking for does not display anywhere.

Re: Removing WLAN that was created in error

sanjay_kumar — Wed, 15 Feb 2023 17:09:50 GMT

Hi @Lennar_Saechao
So where do you see the SSID which is broadcasting which you do not want to?
From client?

You can also verify from the AP CLI if the SSID is broadcasting or not.
Login to the AP CLI and use the below command to see the list of SSIDs AP is broadcasting.
Master :
ap-mode
get wlanlist

Member:
get wlanlist

Re: Removing WLAN that was created in error

Lennar_Saechao — Wed, 15 Feb 2023 17:54:33 GMT

I see it when im searching for wifi to connect to from any wifi enabled device.