topic R650 - No Application Recognition & Control Data in Unleashed

R650 - No Application Recognition & Control Data

aglabs — Wed, 16 Mar 2022 21:19:07 GMT

Got 3 R650's in unleashed, a few months back I noticed the Application Recognition & Control page would display no data is available, even though ARC is enabled on two SSID's. If I review syslog, I can see app data is being classified:

statd_fill_entry: 162: V4 flows ssid:<ssid> app:hulu

I also verified if I setup an application ACL it works. However there is no data displayed on the ARC page for application usage.

I am running firmware: 200.12.10.5.234

Anyone have any ideas?

Re: R650 - No Application Recognition & Control Data

ArtemS — Sun, 07 Jul 2024 23:33:49 GMT

Well, at least thank you, since I have the same problem.

Re: R650 - No Application Recognition & Control Data

andatche — Wed, 17 Jul 2024 19:58:29 GMT

I’m having the same issue on 200.15.6.112.54. It worked initially after enabling Application Recognition on a number of SSIDs but stopped working after the APs were rebooted during a power cut. Toggling Application Recognition on and off again has not made any difference.

EDIT: Rebooting the master again resolved the problem.