topic Re: R720 Not saving CLI configs in Unleashed

R720 Not saving CLI configs

robert_allen — Tue, 11 Jun 2019 15:45:48 GMT

I have an R720 running Unleashed 200.7. When I issues commands to disable igmp and directed multicast the settings aren't saved after a reboot of the AP.

Commands issued are:

set qos eth1 igmp disable
set qos eth1 directed multicast disable
get qos eth1

That shows the services disabled. But when I reboot they show enabled again.

Is there a save command that is being missed.

Re: R720 Not saving CLI configs

michael_brado — Tue, 11 Jun 2019 21:24:13 GMT

AP CLI commands often do not persist a reboot. You want to configure these parameters on the WLAN(s) they advertise.

Re: R720 Not saving CLI configs

robert_allen — Wed, 12 Jun 2019 10:57:42 GMT

How do you configure those on the WLAN? I don't see an IGMP option in the GUI on the WLAN? Or is that not a tuneable option?

Re: R720 Not saving CLI configs

michael_brado — Wed, 12 Jun 2019 16:39:34 GMT

Here is a Knowledge Base Article, https://support.ruckuswireless.com/articles/000006234

You can try each of your AP commands on the WLANx that corresponds to the one(s) you use, instead of the Eth1 interface.