topic Re: ACL not working correctly in Unleashed

ACL not working correctly

michael_grant_6 — Sat, 30 Jul 2016 17:57:19 GMT

I'm setting up an ACL for a WLAN to rate limit iOS devices and allow all others by default. When I apply this method, all non-iOS clients disconnect and cannot connect to the WLAN. I'm under the impression that all non-iOS devices should be able to connect to the WLAN without any rate limit restriction.

Re: ACL not working correctly

mark_anthony_sa — Mon, 01 Aug 2016 03:19:44 GMT

I'm guessing Implicit Deny is in effect like on Cisco ACLs so you must add another rule (next line) for non-iOS devices?

Re: ACL not working correctly

robert_lowe_722 — Tue, 02 Aug 2016 10:05:53 GMT

What software version are you running on the controller? Have you checked known product issues for you version of software? The setting 'allow all by default' should mean other devices can connect but maybe there is a bug in your load.

Also, what is the reason to rate limit iOS only?

Re: ACL not working correctly

michael_grant_6 — Tue, 02 Aug 2016 13:42:17 GMT

That's how it works on a ZD managed network when "allow all by default" is selected. I am on 200.1.9.12.62. There are no known issues related to ACL in the software release notes.

Re: ACL not working correctly

robert_lowe_722 — Tue, 02 Aug 2016 13:45:34 GMT

Ah so this is a standalone AP?

Re: ACL not working correctly

robert_lowe_722 — Tue, 02 Aug 2016 13:47:36 GMT

What AP?

Re: ACL not working correctly

michael_grant_6 — Tue, 02 Aug 2016 13:49:34 GMT

No, this is an unleashed network. I have another site that uses ZD and the "allow all by default" allows all other clients without limitations. APs are R310.

Re: ACL not working correctly

robert_lowe_722 — Tue, 02 Aug 2016 13:51:17 GMT

Then i would suggest you log a case with support as its most likely a bug. Sorry 😞