topic Re: Set Ip address in unleashed ap in Unleashed

Set Ip address in unleashed ap

daniel_snchez — Wed, 14 Feb 2018 20:53:03 GMT

Hello friends, I have an AP with a "not UNLEASHED" firmware version, i change the ip parameters, then upload a firmware version, and change the ip to 192.168.0.1, the CLI command "set ipaddr wlan vlan " does not work with this version, how i can change the ip address with the CLI in this version. Regards

Re: Set Ip address in unleashed ap

roberto_constan — Wed, 14 Feb 2018 21:19:29 GMT

Dont you have gui access? What firmware version is?

Re: Set Ip address in unleashed ap

daniel_snchez — Wed, 14 Feb 2018 21:30:12 GMT

Hello, the firmware is 200.5.10.0.291 i need know the CLI process, in the GUI is necessary configure the unleashed WLAN , i want put the different to default IP in the AP without configuring WLAN and system unleashed. Regards (R310)

Re: Set Ip address in unleashed ap

roberto_constan — Mon, 19 Feb 2018 15:10:24 GMT

Hello Daniel,

Try with this:

set ipmode : set ipmode {wan|lan|video|mgmt} {ipv4|ipv6|dual}
ipv6-only cannot be set when hotspot or router mode is enabled -- Modify IP Mode
set ipaddr : set ipaddr {wan|video|mgmt} [vlan ] {options}
-> "static IP case"
-> dynamic "DHCP case "
-- Modify IP address
set dvlan : set dvlan {enable|disable}
-- Modify AP WLAN's dynamic VLAN mode

Regards,

Roberto Constante