https://community.ruckuswireless.com/t5/Unleashed/Unleashed-captive-portals-and-firewalls/m-p/34012#M3452 If we set up a captive portal on our master unleashed AP and allow traffic on firewall according to master AP's IP address, what will happen if master AP goes out and another AP takes over its roll? Do we have to allow traffic on the firewall for all AP's or? Mon, 12 Feb 2018 10:26:10 GMT ana_sm 2018-02-12T10:26:10Z https://community.ruckuswireless.com/t5/Unleashed/Unleashed-captive-portals-and-firewalls/m-p/34012#M3452 If we set up a captive portal on our master unleashed AP and allow traffic on firewall according to master AP's IP address, what will happen if master AP goes out and another AP takes over its roll? Do we have to allow traffic on the firewall for all AP's or? Mon, 12 Feb 2018 10:26:10 GMT https://community.ruckuswireless.com/t5/Unleashed/Unleashed-captive-portals-and-firewalls/m-p/34012#M3452 ana_sm 2018-02-12T10:26:10Z https://community.ruckuswireless.com/t5/Unleashed/Unleashed-captive-portals-and-firewalls/m-p/34013#M3453 I always define a Management IP, that all your Unleashed APs will use when they are Master mode.<BR /><BR /> Under Admin &amp; Services, IP Settings, Management Interface tab.&nbsp; Your captive portal will use this IP too. Mon, 12 Feb 2018 16:53:37 GMT https://community.ruckuswireless.com/t5/Unleashed/Unleashed-captive-portals-and-firewalls/m-p/34013#M3453 michael_brado 2018-02-12T16:53:37Z