https://community.ruckuswireless.com/t5/Unleashed/Ports-used-LWAPP/m-p/31080#M3183 What ports are used when a master talks to and picks up a secondary / slave device. We spoke to support who say just LWAPP on ports 12222 & 12223. We have a bridged interface on a firewall so we added the Hex of these ports to allow such traffic but they still wont see each other. Are there any other ports required or just those two to communicate ? Tue, 26 Jan 2016 16:35:44 GMT richard_leach_7 2016-01-26T16:35:44Z https://community.ruckuswireless.com/t5/Unleashed/Ports-used-LWAPP/m-p/31080#M3183 What ports are used when a master talks to and picks up a secondary / slave device. We spoke to support who say just LWAPP on ports 12222 & 12223. We have a bridged interface on a firewall so we added the Hex of these ports to allow such traffic but they still wont see each other. Are there any other ports required or just those two to communicate ? Tue, 26 Jan 2016 16:35:44 GMT https://community.ruckuswireless.com/t5/Unleashed/Ports-used-LWAPP/m-p/31080#M3183 richard_leach_7 2016-01-26T16:35:44Z https://community.ruckuswireless.com/t5/Unleashed/Ports-used-LWAPP/m-p/31081#M3184 I've inquired with Eng, and you may at least also need FTP for firmware upgrades. Thu, 28 Jan 2016 18:36:06 GMT https://community.ruckuswireless.com/t5/Unleashed/Ports-used-LWAPP/m-p/31081#M3184 michael_brado 2016-01-28T18:36:06Z