topic Re: H510 Unleashed won't work in Unleashed

H510 Unleashed won't work

zibei_li — Mon, 24 May 2021 06:58:57 GMT

Hi i got one h510, recently i flashed unleashed firmware into it, but it just won't work.

there are two situtation
1 , when there is already one unleahsed network there, H510 won't join the current one, always shows "building the unleahsed network, it may take a few minutes"

2, when there has no unleashed network, i can configure the h510, and can change the settings in web gui, but there shows no ap listed. so there has no wireless radio.

I've tried hard set on h510, ssh into the h510 set factory. nothing really helped.

thanks

Re: H510 Unleashed won't work

zibei_li — Mon, 24 May 2021 07:07:11 GMT

and i've tried to flash serval different ver. of firmware. Nothing unleashed build will work, but standalone ver. works fine.

Re: H510 Unleashed won't work

syamantakomer — Tue, 25 May 2021 20:16:49 GMT

Hi Zibei,

Is this AP works on stand alone version? If yes, do you have more APs in the network running as Unleashed?

If there is already one master AP in the network, try to set the AP role to member and see if it joins. Also manually point the AP to existing master AP.

rkscli: set election
Usage: set election role 1

Re: H510 Unleashed won't work

zibei_li — Wed, 26 May 2021 03:50:33 GMT

yes ap works on stand alone version.

currently i have 5 aps running as unleashed.

rkscli: set election role 1
Fix role set ok
OK
rkscli:

and when i try to access webpage, it still tells me Building the Unleashed Network. It may take a few minutes.

Re: H510 Unleashed won't work

syamantakomer — Wed, 26 May 2021 13:19:24 GMT

Hi Zibei,

Please open a support case for further troubleshooting.

Re: H510 Unleashed won't work

francois_vuuren — Mon, 27 Dec 2021 16:20:56 GMT

Make sure the AP's country codes are the same. A -US AP cannot be in a different country code other than US, but -WW can. If in doubt set all to US.