topic Re: Building the Unleashed Network. It may take a few minutes. in Unleashed

Building the Unleashed Network. It may take a few minutes.

kyle_bogenberge — Tue, 30 Jan 2018 17:39:49 GMT

upgraded an R600 to 200.5.10.0.291 Unleashed, tried to join it to our current unleashed network, it joins, AP disconnects, then gets stuck in a boot loop with a message of "Building the Unleashed Network. It may take a few minutes." on the gui address for it. It seems to be stuck like this.

Really not sure what to make of it. I was able to get the wizard to pop up once, and am currently trying to-do that so i can flash backwards to an older version of unleashed that i know worked for the original AP we have functional. Also the wizard hasn't had the option of 'join ap to network' only setup a new unleashed network. It was like this for both of them...

Re: Building the Unleashed Network. It may take a few minutes.

tony_nilles — Tue, 30 Jan 2018 20:22:09 GMT

Update:

got it out of the bootloop by resetting for 8 seconds after it came online.

Same issue persists with joining though, not sure what to make of it.

Re: Building the Unleashed Network. It may take a few minutes.

kyle_bogenberge — Tue, 30 Jan 2018 20:23:45 GMT

Update: got it out of the bootloop by resetting for 8 seconds after it came to a powered on state.

issue still persists with joining the second ap as a member. Not sure what to make of that.

Re: Building the Unleashed Network. It may take a few minutes.

kyle_bogenberge — Thu, 01 Feb 2018 14:20:16 GMT

Well just in case someone finds this issue... i figured out how to get around it.

R600 Flashed with Unleashed, multiple ap's HAVE to be set to DHCP or the second AP will never join master. I suspect they try to use the same IP since you cannot change them individually. (it's locked out for some reason.)

this is 200.5.10.0.291

Re: Building the Unleashed Network. It may take a few minutes.

hyosang_choi — Mon, 05 Feb 2018 02:54:00 GMT

I think Ruckus intentionally made the UAP work with dhcp.

@ Ruckus, Plz confirm this.

Re: Building the Unleashed Network. It may take a few minutes.

michael_brado — Tue, 06 Feb 2018 22:38:19 GMT

Yes, all Unleashed APs will look for local DHCP. Typical installations have an Internet Router (def-gw) and
DHCP in place on the LAN when they bring up the first UAP. Bring up one UAP and let it build your network
before connecting additional APs, and the new ones should find the Master AP after they get DHCP/def-gw/DNS
info from the LAN.

When you plan to use the first UAP in Router mode, giving out DHCP/DNS, it is necessary to setup the services
before connecting the subsequent Unleashed APs, so they can find the DHCP server.