topic Re: Unleashed R710 Support UAPSD (WMM Power Save)? in Unleashed

Unleashed R710 Support UAPSD (WMM Power Save)?

theprez — Sun, 29 Jan 2017 01:05:41 GMT

Does the unleashed R710 support unscheduled power save UAPSD/WMM Powersave? I can't seem to find a setting for that.

Thx

Re: Unleashed R710 Support UAPSD (WMM Power Save)?

monnat_systems — Sun, 29 Jan 2017 16:50:57 GMT

JP

as per datasheet - http://c541678.r78.cf2.rackcdn.com/datasheets/ds-zoneflex-r710.pdf

powersave is supported and i think R710 do supports unscheduled power save UAPSD/WMM Powersave though it does not mentions about it.

Better someone from Ruckus can confirm about it..

Re: Unleashed R710 Support UAPSD (WMM Power Save)?

monnat_systems — Sun, 29 Jan 2017 16:53:47 GMT

i clearly remembered working with TAC for an issue with PS on R700 years ago:

Resolved an issue with R700 APs rebooting due to target assert failure caused by a UAPSD power save issue. (ID ER-1707)

Re: Unleashed R710 Support UAPSD (WMM Power Save)?

theprez — Sun, 29 Jan 2017 20:08:54 GMT

Thx - I contacted support and they gave me some "set " commands to use but apparently those were only for the ZoneFlex. Didn't get very far when I mentioned this was for the unleashed model. The same commands didn't work in the CLI of the unleashed.

Thx

Re: Unleashed R710 Support UAPSD (WMM Power Save)?

michael_brado — Mon, 30 Jan 2017 19:30:16 GMT

Yes, Unleashed supports UAPSD/WMM, and by default the DTIM is 2.

You may wish to issue a CLI command from your Master AP for "Spectralink Mode" which will
adjust DTIM=2, BSS-minrate = 5.5, RTS/CTS protection mode enabled.

See KBA-5875: Unleashed Configuring DTIM on Unleashed APs.
https://support.ruckuswireless.com/answers/000005875

Re: Unleashed R710 Support UAPSD (WMM Power Save)?

theprez — Mon, 30 Jan 2017 19:32:56 GMT

Michael - is it on by default then? I don't see a setting in the unleashed GUI and the commands given by support appear to be for the ZoneFlex version of the R710 using a "set" command.

It doesn't appear I can access the URL provided.

Thx

Re: Unleashed R710 Support UAPSD (WMM Power Save)?

john_d — Mon, 30 Jan 2017 21:03:54 GMT

Spectralink Compatibility mode is off by default

Re: Unleashed R710 Support UAPSD (WMM Power Save)?

michael_brado — Mon, 30 Jan 2017 21:18:28 GMT

Yes, UAPSD in WMM is supported by default, and the 'Spectralink' setting will additionally perform many other VoIP device related settings.
It does take active Support contract to view Knowledge articles, but one Unleashed support for up to 25 APs.