topic Flashing APs to get Unleashed in Unleashed

Flashing APs to get Unleashed

scott_baker_612 — Wed, 28 Mar 2018 02:13:03 GMT

HI,

I have 4 APs i want to upgrade to unleashed. I brought 2x R310's and 1x R500, plus a older R500 still working. Do i need to flash to a certain version of firmware first then to upgrade to the Unleashed firmware?
I just found out after that i could have brought AP's with unleashed flashed already on them! 😞

Thanks

Re: Flashing APs to get Unleashed

johnson_nguyen_ — Wed, 28 Mar 2018 03:25:42 GMT

You can flash straight to Unleashed firmware. Just do a factory reset afterward (hold reset button for 8 seconds).

https://support.ruckuswireless.com/software/1547-ruckus-unleashed-ap-200-5-10-0-291-ga-refresh3-soft...

The only difference with buying the 9U1 SKU (Unleashed) over the 901 (Standalone/Solo/Controller) is that you'll get the same one back if you have to send it in. It takes mere minutes to update the firmware so I see no issue.

Re: Flashing APs to get Unleashed

michael_brado — Wed, 28 Mar 2018 16:20:03 GMT

Yes, you can re-flash your Solo (901 part number) APs, but if you ever need an RMA you will get another Solo AP (that you will have to re-flash again).
Ruckus recommends to return your APs for Unleashed firmware models.

That said, it's also easier to upgrade a set of Unleashed APs, as you only need to upgrade one (Master AP model), and it will upgrade all other models.