topic AP R550 Firmware in Unleashed

AP R550 Firmware

blake_oeth — Thu, 03 Dec 2020 17:52:43 GMT

It's been fun just not a whole lot of fun. I have a ZD1200 and testing two AP's an R550 and 750.

The R550 has a disconnected status and I was thinking I could upgrade the firmware. I already have done so for 1200.
Now running at 10.4. I can seem to find the correct patch to load from the 1200 to upgrade the R550.

Re: AP R550 Firmware

DarrelRhodes — Thu, 03 Dec 2020 18:43:20 GMT

Hi Blake,

In order to adopt the R550 AP to the Zone Director, the ZD must be running a minimum of 10.4.1.0.214 firmware code.

The AP should be running standalone code 114.0 to be adopted by the ZD.

HTH,
Darrel.

Re: AP R550 Firmware

eizens_putnins — Fri, 04 Dec 2020 09:39:50 GMT

Obviously you need supported firmware versions to get this working. To check if AP is supported, there are release notes for each ZD1200 release. Doesn't make sense to be unhappy if you try to use wrong firmware -- it shouldn't work and it for sure will not work. It is expected. So -- read release notes!