topic Re: Wireless Configuration in Web GUI Not Appear Ruckus R600 in Unleashed

Wireless Configuration in Web GUI Not Appear Ruckus R600

ness_uss — Fri, 12 Jan 2018 07:42:32 GMT

I want configure wireless but the menu absent in web GUI. Anybody can help me to bring back the menu.

Re: Wireless Configuration in Web GUI Not Appear Ruckus R600

monnat_systems — Fri, 12 Jan 2018 07:49:06 GMT

pls confirm the software version on the AP.

Re: Wireless Configuration in Web GUI Not Appear Ruckus R600

ness_uss — Fri, 12 Jan 2018 08:04:00 GMT

software version- 3.4.0.0.1306
can help me? what to do?

Re: Wireless Configuration in Web GUI Not Appear Ruckus R600

monnat_systems — Fri, 12 Jan 2018 08:16:25 GMT

you are running software version which does not allow WiFi/Radio configuration ...

Re: Wireless Configuration in Web GUI Not Appear Ruckus R600

monnat_systems — Fri, 12 Jan 2018 08:17:01 GMT

go here -- https://support.ruckuswireless.com/software/1018-zoneflex-r600-indoor-ap-104-0-0-0-1347-ga-software-...

download this firmware and upgrade your AP. After upgrade, you will get relevent options...

Re: Wireless Configuration in Web GUI Not Appear Ruckus R600

martin_martin — Fri, 12 Jan 2018 10:37:12 GMT

Correct as Monnat mentioned the 3.4.0 version is actually a controller managed version, which means the AP is managed by a controller. So if you want to change it within this, you need to login to the controller itself.

if you want to use the AP now as standalone then the 104 or unleashed software should be used.

regards
Martin

Re: Wireless Configuration in Web GUI Not Appear Ruckus R600

michael_brado — Fri, 12 Jan 2018 18:06:59 GMT

And to change from a controller managed version to Solo or Unleashed, you need to do a Hard Reset on your AP,
reverting it to a 192.168.0.1 IP address, with super/sp-admin login credentials. Best to do this off your network.

Re: Wireless Configuration in Web GUI Not Appear Ruckus R600

ness_uss — Mon, 15 Jan 2018 06:26:56 GMT

Thanks a lot all friends. Problem solve.