topic Re: How do you disable fanless mode on a ICX 7150? in ICX Switches

How do you disable fanless mode on a ICX 7150?

luke_cremer — Mon, 04 Jan 2021 20:50:41 GMT

I am new to working with Ruckus switches. We purchased one and I am trying it out as well as it's features. I enabled fanless mode and am wondering if there is a command to disable it without factory defaulting the switch. Any advice is appreciated.

Re: How do you disable fanless mode on a ICX 7150?

BenBeck — Mon, 04 Jan 2021 20:53:15 GMT

Hey Luke,

You should just need to issue "no chassis fanless-mode-enable <unit-id/all>" from global config (conf t) mode:

http://docs.ruckuswireless.com/fastiron/08.0.60/fastiron-08060-commandref/GUID-28081659-1C19-4393-9071-96ED9FEB8890.html

Re: How do you disable fanless mode on a ICX 7150?

luke_cremer — Mon, 04 Jan 2021 20:59:14 GMT

Thanks Ben! It ended up being "no chassis fanless all" I know I could replace "all" with the device DECIMAL, but this switch is stand alone so I took the easy way.

Re: How do you disable fanless mode on a ICX 7150?

netwizz — Mon, 04 Jan 2021 21:13:13 GMT

You probably know this... but also a write mem or copy start run.