Assigning IP address for Icx 8200 switches running on firmware version 10010.

Liong — Tue, 09 Dec 2025 01:23:20 GMT

Hi,

We have started to deploy ICX 8200 switch with firmware 10010 firmware. Previously, our switches are all ICX 7150, running on firmware 08095r. We have the question below.

1) Is the firmware 10010 router mode or switch mode? As in previous version we can differentiate by the letter R (SPR08095r) in the firmware file.

2) We have been looking everywhere for the command to assign ip to the switch, but could not get an answer. How do we assign ip to the switch, using virtual routing interface (like in 08095r)?

example:

vlan 200 by port
tagged ethe 1/1/1 ethe 1/1/25 to 1/1/29
untagged ethe 1/1/2
router-interface ve 200
!

!
interface ve 200
ip address 172.23.200.200 255.255.255.0
!

3) We could not find the proper document to see the list of cli changes from 0809 version to 10100 version. Could you point us to the right document?

Many Thanks!

Re: Assigning IP address for Icx 8200 switches running on firmware version 10010.

Chandini — Tue, 20 Jan 2026 10:57:31 GMT

Hi Liong

Thank you for reaching us

Below is a link which will help you with IP configuration on the 8200 switch

https://community.ruckuswireless.com/t5/RUCKUS-Self-Help/IP-Address-Assignment-in-8200-Devices/td-p/77961

From 10.0.10 only router code are available and you are running route code

Below are few more links to consider checking

https://docs.commscope.com/bundle/fastiron-10010-upgradeguide/page/GUID-6A460013-56E3-4580-8A4A-811F75A10A18.html

Thank you

topic Re: Assigning IP address for Icx 8200 switches running on firmware version 10010. in ICX Switches

Assigning IP address for Icx 8200 switches running on firmware version 10010.

Re: Assigning IP address for Icx 8200 switches running on firmware version 10010.