[BrcdSoftlockup]: BUG: soft lockup - CPU#0 stuck for 100s! [mount:565]

Fsilverman — Thu, 18 Sep 2025 21:59:46 GMT

TRIED TO INSTALL BOOT UP SOFTWARE TO FIX [: BUG: soft lockup - CPU#0 stuck for 100s! [mount:565]
000071e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
00007200: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ICX7150-C12P

SN# FEK3226N1JN

Re: [BrcdSoftlockup]: BUG: soft lockup - CPU#0 stuck for 100s! [mount:565]

Mayank — Sun, 21 Sep 2025 07:16:11 GMT

Hi Fsilverman ,

Thank you for sharing the error message.

I have a question for you here :

1> Did you try to boot the ICX from the primary or secondary partition like this : boot_primary or boot_secondary.
If not can you give it a try .

Could you please try the software recovery method by following the below link :

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-perform-a-Software-recovery-on-an-ICX7150-switch/td-p/47483

Please let us know how it goes.

Moving Forward If this issue is not resolved , Please log a ticket with the below link so that we will help you to process RMA

https://support.ruckuswireless.com/contact-us

I hope this information helps you

Please feel free to leave us a message if any concerns

Note: Please feel free to mark the post as ACCEPTED SOLUTIONS if its addressed your query.

Thanks
Mayank

topic [BrcdSoftlockup]: BUG: soft lockup - CPU#0 stuck for 100s! [mount:565] in ICX Switches

[BrcdSoftlockup]: BUG: soft lockup - CPU#0 stuck for 100s! [mount:565]

Re: [BrcdSoftlockup]: BUG: soft lockup - CPU#0 stuck for 100s! [mount:565]