topic Issue booting an ICX7150-12 in ICX Switches

Issue booting an ICX7150-12

jpottsnpi — Mon, 21 Jul 2025 20:43:26 GMT

Hello,

I am having an issue booting from the primary partition of my ICX7150

The following is a snippet of what happens when the primary partition begins to boot.

I can boot the secondary just fine by hitting 'b' and running the secondary partition.
I have tried following the steps to recover the partition via TFTP

Starting kernel ... Mounting file system... booting with 4.4 kernel NAND Type: Micron NAND 2GiB (x 1) PLATFORM MN dd cmd: UBI Config partition mounted Resource partition is mounted!! eUSB Not mounted or detected Processing packages from primary partition New packages found, uninstalling old packages if any.. UBIFS error (ubi0:0 pid 717): ubifs_check_node: bad magic 0x6501831, expected 0x 6101831 UBIFS error (ubi0:0 pid 717): ubifs_check_node: bad node at LEB 86:754784 Not a node, first 24 bytes: 00000000: 31 18 50 06 f8 b7 48 db 04 23 18 00 00 00 00 00 a0 00 00 00 00 02 00 0 0 1.P...H..#.............. UBIFS error (ubi0:0 pid 717): ubifs_read_node: expected node type 0 UBIFS error (ubi0:0 pid 717): ubifs_iget: failed to read inode 6775, error -117 UBIFS error (ubi0:0 pid 717): ubifs_lookup: dead directory entry 'formparser.cpy thon-35.pyc', error -117 rm: can't stat '/.pkg/usr/lib/python3.7/site-packages/flask_packUBIFS error (ubi 0:0 pid 717): ubifs_check_node: bad CRC: calculated 0xc3babc1a, read 0x7907b52f age/werkzeug/__pycache__/formparser.cpython-35.pyc': Structure nUBIFS error (ubi 0:0 pid 717): ubifs_check_node: bad node at LEB 86:754944 eeds cleaning rm: can't remove '/.pkg/usr/lib/python3.7/site-pa magic 0x6101831 ckages/flask_package/werkzeug/__pycache__/utils.cpython-35.pyc': crc 0x7907b52f Read-only file system rm: can't remove '/.pkg/usr/lib/python3. node_type 0 (inode node) 7/site-packages/flask_package/werkzeug/__pycache__/routing.cpyth group_ty

Re: Issue booting an ICX7150-12

Imran_ruckus — Mon, 21 Jul 2025 20:58:50 GMT

Hi @jpottsnpi
Greetings!!!

Thank you for reaching out to the RUCKUS Community Forums.

Could you please confirm if this inquiry is related to a RUCKUS setup in a Lennar Home?

Looking forward to your response.

Best regards,
Imran Sanadi
RUCKUS | Lennar Home Community Support

Re: Issue booting an ICX7150-12

Imran_ruckus — Wed, 23 Jul 2025 12:46:09 GMT

Hi @jpottsnpi
Greetings!!!

Thank you for reaching out to the RUCKUS Community Forums.

Could you please confirm if this inquiry is related to a RUCKUS setup in a Lennar Home?

Looking forward to your response.

Best regards,
Imran Sanadi
RUCKUS | Lennar Home Community Support

Re: Issue booting an ICX7150-12

Imran_ruckus — Fri, 25 Jul 2025 12:32:14 GMT

Hi @jpottsnpi

Greetings!!!

I trust this message finds you well.

I kindly request an update on the status of the issue so that we may proceed further with resolving it.

If we do not receive a response from you within 24 hours from the timestamp of this message, your case will proceed to closure.

Thank you.

Best regards,
Imran Sanadi
RUCKUS | Lennar Home Community Support