RUCKUS ICX firmware image automatic fallback recovery

viththahan — Wed, 09 Jul 2025 07:40:00 GMT

Is there any automatic fallback recovery for firmware images in the flash memory of the switches during an image corruption?

Re: RUCKUS ICX firmware image automatic fallback recovery

Mayank — Wed, 09 Jul 2025 08:33:44 GMT

Hi Viththahan ,

Thank you for posting your query !!!

I understand that you would like to know if there any automatic fallback recovery for firmware images in the flash memory of the switches during an image corruption

Yes, Ruckus switches do have an automatic firmware fallback mechanism in flash memory.

ICX series maintain two firmware images in their flash memory:

Primary (Active) Image

Secondary (Backup) Image

If the switch fails to boot from the active image (due to corruption or failed upgrade), it will automatically attempt to boot from the backup image stored in the alternate partition. This provides a built-in recovery path without manual intervention.

I hope this information helps you

Please feel free to leave us a message if any concerns

Note: Please feel free to mark the post as ACCEPTED SOLUTIONS if its addressed your query.

Thanks
Mayank

Re: RUCKUS ICX firmware image automatic fallback recovery

viththahan — Wed, 09 Jul 2025 08:36:16 GMT

Thanks for the input!

topic Re: RUCKUS ICX firmware image automatic fallback recovery in ICX Switches

RUCKUS ICX firmware image automatic fallback recovery

Re: RUCKUS ICX firmware image automatic fallback recovery

Re: RUCKUS ICX firmware image automatic fallback recovery