topic Re: how to convert ICX 8200 from Router to Switch mode. in ICX Switches

how to convert ICX 8200 from Router to Switch mode.

chetansinh_dabh — Sat, 10 Jun 2023 12:24:02 GMT

how to convert ICX 8200 from Router to Switch mode.

can you possibly, change the mode from router to switch?

I am showing in the switch both images are in router mode.

ICX8200-24P Router#show version

UNIT 1: compiled on Nov 1, 2022, at 00:46:53 labelled as RDR10000
(78438264 bytes) from Primary RDR10000.bin (UFI)
SW: Version 10.0.00T253

Re: how to convert ICX 8200 from Router to Switch mode.

BenBeck — Sat, 10 Jun 2023 12:48:59 GMT

Starting with 10.0, the switching image is deprecated. There will only be the one image (routing) for each platform starting from 10.0. Switching features are still available in this image. Hope that helps!

Re: how to convert ICX 8200 from Router to Switch mode.

Miguel_Coveñas — Wed, 14 May 2025 20:59:25 GMT

Alguien sabe el comando para agregar 4 VLAN pasarlo a modo troncal? es apra un switch ICX8200

Re: how to convert ICX 8200 from Router to Switch mode.

BenBeck — Wed, 14 May 2025 22:01:16 GMT

Here's an example

Enable

Conf t

Vlan 10 20 30 40

Tagged eth 1/1/1 (change/add ports as needed)

The above would allow tagged packets for vlans 10 20 30 40 across port 1/1/1.

Re: how to convert ICX 8200 from Router to Switch mode.

Miguel_Coveñas — Fri, 04 Jul 2025 14:35:45 GMT

Ok muchas gracias.