topic Simulation in ICX Switches

Simulation

israr_ahmed_4m8 — Mon, 28 Jan 2019 06:58:39 GMT

Dear All,
I Am New in ruckus so that i dont know much about it, may i know is there simulation software is there to practice like packet tracer is there for cisco.
thank you.

Re: Simulation

martin_martin — Mon, 28 Jan 2019 10:19:30 GMT

Hi Israr,

I don't directly understand your question.
Do you mean you want to mirror a port? or you want the switch to do the packet capture itself?

regards
Martin

Re: Simulation

hashim_bharooch — Mon, 28 Jan 2019 11:07:12 GMT

Hi Israr,

No we do not have a simulator. You need to configure an actual switch.

Best Regards
Thanks
Hashim

Re: Simulation

israr_ahmed_4m8 — Mon, 28 Jan 2019 14:03:34 GMT

ok thank you , can i have your whatsapp no or email id as i can contact you directly if i need anything

Re: Simulation

martin_martin — Mon, 28 Jan 2019 14:14:25 GMT

Israr, If you would like support, please contact Ruckus support via support.ruckuswireless.com

You can call them, or open a case via the website.

regards
martin

Re: Simulation

david_chavarria — Mon, 28 Jan 2019 14:37:41 GMT

Hello Israr.

Unfortunately we don't have a software simulator for ICX CLI, you will need to have access to a physical switch in order to get familiar with it. I recommend you to check these YouTube explainer series from one of our systems engineers.

Here is an example link: https://www.youtube.com/watch?v=_PAAXi55qmc

You can find almost every topic in his channel.

Regards

Re: Simulation

israr_ahmed_4m8 — Mon, 28 Jan 2019 15:13:13 GMT

thank you Dacvar

Re: Simulation

david_chavarria — Mon, 28 Jan 2019 15:54:29 GMT

You are Welcome

Re: Simulation

israr_ahmed_4m8 — Wed, 30 Jan 2019 11:45:42 GMT

may i have your whatsapp no or email id please or skype id

Re: Simulation

martin_martin — Wed, 30 Jan 2019 13:02:46 GMT

Israr, If you would like support, please contact Ruckus support via support.ruckuswireless.com

You can call them, or open a case via the website.