Console ICX7250 - Access Denied

Adimin — Fri, 31 Jan 2025 11:40:36 GMT

Hi,

On a ICX7250 switch, using SecureCRT/Putty , and a micro usb - serial cable, I have a "acces denied" displayed on my session ? Is it possible to unlock this console port?

Re: Console ICX7250 - Access Denied

kayal — Mon, 28 Apr 2025 15:40:07 GMT

On the ICX7250, only the mini-USB console port is available for direct console access.
To ensure proper connection, please verify the following:

Use the provided micro-USB to console cable.
On your PC, open Device Manager and confirm the correct COM port assigned to the USB Serial device.
In your terminal emulator (SecureCRT, PuTTY, etc.), select the correct COM port.
Configure the session settings exactly as follows:

Baud rate: 9600
Data bits: 8
Parity: None
Stop bits: 1
Flow control: None

Incorrect COM port selection or mismatched serial settings may cause errors such as "access denied" or prevent successful session establishment.
Please verify the COM port and terminal settings, and try reconnecting.

Regards,
Kayal

topic Re: Console ICX7250 - Access Denied in ICX Switches

Console ICX7250 - Access Denied

Re: Console ICX7250 - Access Denied