topic Re: icx 7150 switch Change Boot Sequence in ICX Switches

icx 7150 switch Change Boot Sequence

nigelcov1 — Tue, 04 Feb 2025 04:33:14 GMT

I recently changed the boot sequence from primary to secondary in config mode. I am now unable to put it back to primary . When I try to change it back I get an error message " error-boot sequence has reached max 1 entries".

Any suggestions on how to accomplish this would be greatly appreciated.

Thanks!

Re: icx 7150 switch Change Boot Sequence

BenBeck — Tue, 04 Feb 2025 13:28:43 GMT

You just need to remove the existing entry:

enable

conf t

no boot system flash secondary

wr mem

It will then default to primary again.

Re: icx 7150 switch Change Boot Sequence

nigelcov1 — Tue, 11 Feb 2025 15:14:47 GMT

Thanks! Worked perfectly.