topic Re: ICX 7150. How force VLAN interface (VE) to stay always UP? in ICX Switches

ICX 7150. How force VLAN interface (VE) to stay always UP?

nikita_kulikov — Thu, 12 Dec 2019 07:08:59 GMT

Hi!

I need VLAN interface (VE) on ICX7150 (router) always be in state "UP" when all the ports in the VLAN go into an inactive state.
Is there analog of command "no autostate" (Cisco)?

Re: ICX 7150. How force VLAN interface (VE) to stay always UP?

hashim_bharooc1 — Thu, 19 Dec 2019 02:50:16 GMT

Hi Nik,

Hope you are doing Great!

You can have a loopback that will stay up but not on a physical ve interface.

config t
interface loopback 1
ip address a.b.c.d/f

Hope this helps.

Thanks
Hashim

Re: ICX 7150. How force VLAN interface (VE) to stay always UP?

nikita_kulikov — Thu, 19 Dec 2019 06:06:08 GMT

Thanks for answer, Hashim.

But I can't bind a loopback interface to certain VLAN, can I?

Re: ICX 7150. How force VLAN interface (VE) to stay always UP?

hashim_bharooc1 — Thu, 19 Dec 2019 23:32:43 GMT

Hi Nik,

I do not think we can bind the loopback to an ve.

What are you trying to achieve here.
the more details the better, so we can figure out a workaround.

Thanks
Hashim

Re: ICX 7150. How force VLAN interface (VE) to stay always UP?

Cleytonsc — Thu, 30 Jan 2025 14:47:18 GMT

I have with the same problem, my interface ve is down when any physical interface is disconnected. I don't found the command like "no autostate from Cisco"