https://community.ruckuswireless.com/t5/ICX-Switches/ICX-MAC-Auth-configured-for-Access-Point/m-p/97785#M6927 <P>Hi,</P><P>We have a strange behaviour with MAC-Auth configure on an ICX Switch.</P><P>Some interfaces are configured to authenticate Access Point via MAC-Auth (multiple-hosts is configured to allow wireless client's traffic after AP authentication).</P><P>Sometimes for any reason the Access Point port is flapping and the switch authenticate a random MAC address from one of the Wireless Clients instead of the one of the AP. (SSIDs are in bridge mode so we can see the different wireless client mac-address on the switch interface).</P><P>This behaviour seems not be normal, is there a way to avoid id ?<BR /><BR />Thanks in advance,</P><P>&nbsp;</P> Tue, 24 Sep 2024 14:32:53 GMT vvuillemin 2024-09-24T14:32:53Z https://community.ruckuswireless.com/t5/ICX-Switches/ICX-MAC-Auth-configured-for-Access-Point/m-p/97785#M6927 <P>Hi,</P><P>We have a strange behaviour with MAC-Auth configure on an ICX Switch.</P><P>Some interfaces are configured to authenticate Access Point via MAC-Auth (multiple-hosts is configured to allow wireless client's traffic after AP authentication).</P><P>Sometimes for any reason the Access Point port is flapping and the switch authenticate a random MAC address from one of the Wireless Clients instead of the one of the AP. (SSIDs are in bridge mode so we can see the different wireless client mac-address on the switch interface).</P><P>This behaviour seems not be normal, is there a way to avoid id ?<BR /><BR />Thanks in advance,</P><P>&nbsp;</P> Tue, 24 Sep 2024 14:32:53 GMT https://community.ruckuswireless.com/t5/ICX-Switches/ICX-MAC-Auth-configured-for-Access-Point/m-p/97785#M6927 vvuillemin 2024-09-24T14:32:53Z