topic ICX MAC-Auth Access Point multiple-hosts in ICX Switches

ICX MAC-Auth Access Point multiple-hosts

vvuillemin — Tue, 24 Sep 2024 14:28:35 GMT

Hi,

How to return Radius Attribute to configure interface for "multiple-hosts". Is there an existing Radius Attributes ?

Scenario : We have access points in bridge mode that are authenticated through MAC-Auth via a RADIUS Server.

MAC-Address from the Access point should authenticate first with MAC-Auth and other MAC should be passthrough.

Thanks,

Re: ICX MAC-Auth Access Point multiple-hosts

Chandini — Wed, 02 Oct 2024 17:13:52 GMT

Hi Team

Thank you for reaching us

We do have option at interface level to operate in multiple hots mode on the switch. Below is the configuration.

Device(config)#interface eth 1/1/1
Device(config-if-e1000-1/1/1)#authentication auth-mode multiple-hosts

Below are few links you can refer

I hope this helps

Thanks

Re: ICX MAC-Auth Access Point multiple-hosts

vvuillemin — Thu, 03 Oct 2024 07:44:17 GMT

Hi Chandini,

Thanks for your answer. We already configured that.
The goal here is to be able to move an access point from a switch port to another without doing static configuration on the port. That's why I would like to be able to configure the switch port interface by sending back from the radius server a radius attribute that enabling authentication auth-mode multiple-hosts.

Thanks,