<?xml version="1.0" encoding="UTF-8"?>
<rss xmlns:content="http://purl.org/rss/1.0/modules/content/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#" xmlns:taxo="http://purl.org/rss/1.0/modules/taxonomy/" version="2.0">
  <channel>
    <title>topic tinkering with vxlan in ICX Switches</title>
    <link>https://community.ruckuswireless.com/t5/ICX-Switches/tinkering-with-vxlan/m-p/89633#M6056</link>
    <description>&lt;P&gt;i am trying to tinker with vxlan settings, and following this article: &lt;A href="https://docs.commscope.com/bundle/fastiron-09010-l2guide/page/GUID-68DD54AE-D4CA-4102-BA43-FA860C7B38CC.html" target="_blank"&gt;https://docs.commscope.com/bundle/fastiron-09010-l2guide/page/GUID-68DD54AE-D4CA-4102-BA43-FA860C7B38CC.html&lt;/A&gt;&lt;/P&gt;&lt;P&gt;am stumbling at the start -- the 'overlay-gateway' command seems to be missing on both of these icx7150 switches i'm using in my lab.&amp;nbsp; using SPR09010j&lt;/P&gt;&lt;P&gt;ICX7150-24P Router#sh ver&lt;BR /&gt;Copyright (c) Ruckus Networks, Inc. All rights reserved.&lt;BR /&gt;UNIT 1: compiled on Jan 12 2024 at 09:59:12 labeled as SPR09010j&lt;BR /&gt;(33554432 bytes) from Primary SPR09010j.bin (UFI)&lt;BR /&gt;SW: Version 09.0.10jT213&lt;BR /&gt;Compressed Primary Boot Code size = 786944, Version:10.1.26T225 (mnz10126)&lt;BR /&gt;Compiled on Tue Nov 29 12:43:26 2022&lt;/P&gt;&lt;P&gt;HW: Stackable ICX7150-24-POE&lt;BR /&gt;==========================================================================&lt;BR /&gt;UNIT 1: SL 1: ICX7150-24P-4X1G POE 24-port Management Module&lt;BR /&gt;Serial #:&lt;BR /&gt;Software Package: ICX7150_L3_SOFT_PACKAGE&lt;BR /&gt;Current License: 4X10GR&lt;BR /&gt;P-ASIC 0: type B160, rev 11 Chip BCM56160_B0&lt;BR /&gt;==========================================================================&lt;BR /&gt;UNIT 1: SL 2: ICX7150-2X1GC 2-port 2G Module&lt;BR /&gt;==========================================================================&lt;BR /&gt;UNIT 1: SL 3: ICX7150-4X10GF 4-port 40G Module&lt;BR /&gt;==========================================================================&lt;BR /&gt;1000 MHz ARM processor ARMv7 88 MHz bus&lt;BR /&gt;8 MB boot flash memory&lt;BR /&gt;2 GB code flash memory&lt;BR /&gt;1 GB DRAM&lt;BR /&gt;STACKID 1 system uptime is 56 minute(s) 44 second(s)&lt;BR /&gt;The system started at 09:58:51 GMT+00 Fri Jan 12 2024&lt;/P&gt;&lt;P&gt;The system : started=cold start&lt;/P&gt;&lt;P&gt;ICX7150-24P Router#conf t&lt;BR /&gt;ICX7150-24P Router(config)#over&lt;BR /&gt;Unrecognized command&lt;BR /&gt;ICX7150-24P Router(config)#over&lt;BR /&gt;Invalid input -&amp;gt;over&lt;BR /&gt;Type ? for a list&lt;BR /&gt;Node doesn't exist&lt;BR /&gt;ICX7150-24P Router(config)#&lt;/P&gt;</description>
    <pubDate>Tue, 16 Jul 2024 20:25:13 GMT</pubDate>
    <dc:creator>Nate</dc:creator>
    <dc:date>2024-07-16T20:25:13Z</dc:date>
    <item>
      <title>tinkering with vxlan</title>
      <link>https://community.ruckuswireless.com/t5/ICX-Switches/tinkering-with-vxlan/m-p/89633#M6056</link>
      <description>&lt;P&gt;i am trying to tinker with vxlan settings, and following this article: &lt;A href="https://docs.commscope.com/bundle/fastiron-09010-l2guide/page/GUID-68DD54AE-D4CA-4102-BA43-FA860C7B38CC.html" target="_blank"&gt;https://docs.commscope.com/bundle/fastiron-09010-l2guide/page/GUID-68DD54AE-D4CA-4102-BA43-FA860C7B38CC.html&lt;/A&gt;&lt;/P&gt;&lt;P&gt;am stumbling at the start -- the 'overlay-gateway' command seems to be missing on both of these icx7150 switches i'm using in my lab.&amp;nbsp; using SPR09010j&lt;/P&gt;&lt;P&gt;ICX7150-24P Router#sh ver&lt;BR /&gt;Copyright (c) Ruckus Networks, Inc. All rights reserved.&lt;BR /&gt;UNIT 1: compiled on Jan 12 2024 at 09:59:12 labeled as SPR09010j&lt;BR /&gt;(33554432 bytes) from Primary SPR09010j.bin (UFI)&lt;BR /&gt;SW: Version 09.0.10jT213&lt;BR /&gt;Compressed Primary Boot Code size = 786944, Version:10.1.26T225 (mnz10126)&lt;BR /&gt;Compiled on Tue Nov 29 12:43:26 2022&lt;/P&gt;&lt;P&gt;HW: Stackable ICX7150-24-POE&lt;BR /&gt;==========================================================================&lt;BR /&gt;UNIT 1: SL 1: ICX7150-24P-4X1G POE 24-port Management Module&lt;BR /&gt;Serial #:&lt;BR /&gt;Software Package: ICX7150_L3_SOFT_PACKAGE&lt;BR /&gt;Current License: 4X10GR&lt;BR /&gt;P-ASIC 0: type B160, rev 11 Chip BCM56160_B0&lt;BR /&gt;==========================================================================&lt;BR /&gt;UNIT 1: SL 2: ICX7150-2X1GC 2-port 2G Module&lt;BR /&gt;==========================================================================&lt;BR /&gt;UNIT 1: SL 3: ICX7150-4X10GF 4-port 40G Module&lt;BR /&gt;==========================================================================&lt;BR /&gt;1000 MHz ARM processor ARMv7 88 MHz bus&lt;BR /&gt;8 MB boot flash memory&lt;BR /&gt;2 GB code flash memory&lt;BR /&gt;1 GB DRAM&lt;BR /&gt;STACKID 1 system uptime is 56 minute(s) 44 second(s)&lt;BR /&gt;The system started at 09:58:51 GMT+00 Fri Jan 12 2024&lt;/P&gt;&lt;P&gt;The system : started=cold start&lt;/P&gt;&lt;P&gt;ICX7150-24P Router#conf t&lt;BR /&gt;ICX7150-24P Router(config)#over&lt;BR /&gt;Unrecognized command&lt;BR /&gt;ICX7150-24P Router(config)#over&lt;BR /&gt;Invalid input -&amp;gt;over&lt;BR /&gt;Type ? for a list&lt;BR /&gt;Node doesn't exist&lt;BR /&gt;ICX7150-24P Router(config)#&lt;/P&gt;</description>
      <pubDate>Tue, 16 Jul 2024 20:25:13 GMT</pubDate>
      <guid>https://community.ruckuswireless.com/t5/ICX-Switches/tinkering-with-vxlan/m-p/89633#M6056</guid>
      <dc:creator>Nate</dc:creator>
      <dc:date>2024-07-16T20:25:13Z</dc:date>
    </item>
    <item>
      <title>Re: tinkering with vxlan</title>
      <link>https://community.ruckuswireless.com/t5/ICX-Switches/tinkering-with-vxlan/m-p/90172#M6071</link>
      <description>&lt;P&gt;Hello&amp;nbsp;&lt;a href="https://community.ruckuswireless.com/t5/user/viewprofilepage/user-id/22135"&gt;@Nate&lt;/a&gt;&amp;nbsp; ,&amp;nbsp;&lt;/P&gt;
&lt;P&gt;Hope you are doing well ,&amp;nbsp;&lt;/P&gt;
&lt;P&gt;VxLAN is only supported on the following platform&amp;nbsp;&lt;/P&gt;
&lt;P&gt;&amp;nbsp;&lt;/P&gt;
&lt;P&gt;&lt;span class="lia-inline-image-display-wrapper lia-image-align-inline" image-alt="Vsquez_Fer_0-1721234236717.png" style="width: 999px;"&gt;&lt;img src="https://community.ruckuswireless.com/t5/image/serverpage/image-id/13522iF85AF7FF22A81445/image-size/large?v=v2&amp;amp;px=999" role="button" title="Vsquez_Fer_0-1721234236717.png" alt="Vsquez_Fer_0-1721234236717.png" /&gt;&lt;/span&gt;&lt;/P&gt;
&lt;P&gt;Best Regards&amp;nbsp;&lt;/P&gt;
&lt;P&gt;Fernando Vasquez&amp;nbsp;&lt;/P&gt;</description>
      <pubDate>Wed, 17 Jul 2024 16:37:41 GMT</pubDate>
      <guid>https://community.ruckuswireless.com/t5/ICX-Switches/tinkering-with-vxlan/m-p/90172#M6071</guid>
      <dc:creator>Vásquez_Fer</dc:creator>
      <dc:date>2024-07-17T16:37:41Z</dc:date>
    </item>
  </channel>
</rss>

