ICX 7550 boot Loop

vigo — Tue, 16 Apr 2024 09:20:15 GMT

hi guys

need help as my icx 7550 is boot looping

Re: ICX 7550 boot Loop

Mayank — Tue, 16 Apr 2024 12:52:39 GMT

Hi Vigo ,

Thank you for posting you query !!!

I understand that your ICX 7550 is in boot loop.

Did you try to boot the ICX from primary and secondary image from service service os try to boot the primary or secondary partition like this: boot_primary or boot_secondary. If not can you give it a try . And also make sure you are running with 2 fans on icx 7550

Have you tried to recover the unit via software recovery method as shown in the below link, If not can you give it a try.

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-perform-a-Software-recovery-on-an-ICX7150-switch/m-p/47483

You can also refer the below link for your reference for the software recovery:

https://youtu.be/Ql22blH_CGo

If software recovery wont help then next step will be RMA of the unit.

Moving Forward If this issue is not resolved , Please log a ticket with the below link so that we will help you to process RMA

https://support.ruckuswireless.com/contact-us

I hope this information helps you

Please feel free to leave us a message if any concerns

Note: Please feel free to mark the post as ACCEPTED SOLUTIONS if its addressed your query.

Thanks

Re: ICX 7550 boot Loop

Chandini — Wed, 17 Apr 2024 09:22:52 GMT

Hi Vigo

Thank you for reaching us.

Could you help us with the version which was running on the switch before it went to boot loop ?
Have you tried to upgrade the switch to latest version ? If yes then to which version did you try to upgrade the switch ?

Thanks

topic Re: ICX 7550 boot Loop in ICX Switches

ICX 7550 boot Loop

Re: ICX 7550 boot Loop

Re: ICX 7550 boot Loop