topic Re: ICX 7750-48F Copper RJ45 10/100 Compatibility in ICX Switches

ICX 7750-48F Copper RJ45 10/100 Compatibility

byrd23 — Fri, 23 Feb 2024 01:48:02 GMT

Hello,

For an ICX 7750-48F switch, and I would like to connect a copper / RJ-45 device that can only operate at 100 Mbps. With a 1G M-TX SFP in place, issuing the "speed-duplex 100-full" command results in a response of "This speed setting is not applicable to port...". Is there any way to connect a 100 Mbps device to this switch?

Thanks.

Re: ICX 7750-48F Copper RJ45 10/100 Compatibility

Mayank — Fri, 23 Feb 2024 11:41:27 GMT

Hi byrd23,

Thank you for posting your query !!!

I understand you would like to connect a copper/RJ45 device that can only operate at 100Mbps to ICX 7750-48F switch
with a 1G M-TX SFP in place .

It seems 1G M-TX SFP is not supported in ICX7750-48F model.

You can refer the below screen shot for your reference.

You can also refer to the below link for the optic data sheet for your reference.

https://www.commscope.com/globalassets/digizuite/61722-ds-ethernet-optics-family.pdf

You can also refer the below screenshot for you reference that 100 Mbps is not supported:

You can also refer to the below link for your reference, page no 6

https://www.commscope.com/globalassets/digizuite/61733-ds-icx-7750.pdf

Moving Forward If this issue is not resolved, Please log a ticket with the below link so that we can help you further.

https://support.ruckuswireless.com/contact-us

I hope this information helps you

Please feel free to leave us a message if any concerns

Re: ICX 7750-48F Copper RJ45 10/100 Compatibility

byrd23 — Fri, 23 Feb 2024 13:55:11 GMT

I'm using the E1MG-TX, which is supported, but the question is different:

Is there any way to connect a 100 Mbps device to this switch? Does any SFP/SFP+ support 100 Mbps over copper / RJ-45 for this switch?

Re: ICX 7750-48F Copper RJ45 10/100 Compatibility

BenBeck — Fri, 23 Feb 2024 14:01:09 GMT

According to the datasheet, no. The 48f variant does not.

Reference on page 6:

https://www.commscope.com/globalassets/digizuite/61733-ds-icx-7750.pdf

Re: ICX 7750-48F Copper RJ45 10/100 Compatibility

Mayank — Sat, 24 Feb 2024 04:20:13 GMT

Hi byrd23,

According to the datasheet, The 7750-48f variant does not support 100 Mbps.

You can refer to the below screenshot for your reference:

Please refer to the below link for your reference on page 6:

https://www.commscope.com/globalassets/digizuite/61733-ds-icx-7750.pdf

Thanks