topic Re: Configure RADIUS authentication against Active Directory credentials for Ruckus Switch in ICX Switches

Configure RADIUS authentication against Active Directory credentials for Ruckus Switch

htn — Thu, 15 Feb 2024 23:41:12 GMT

Hello everyone,

I am trying to authenticate the switch with AD accounts. I have created the RADIUS client on the NPS and configure the switch according to the instructions. The switch can detect the RADIUS server, but when I tried to access the switch with my AD account, it didn't work. I had to use local account (after disabling RADIUS authentication) to access the switch.

I think I need to customize the vendor specific attribute on the NPS side for Ruckus switch. I tried to follow the instructions, but I didn't succeed as I find it quite vague.

If anyone has attempted it successfully and could give me some guidance, it would be much appreciated.

Regards,

Hayden

Re: Configure RADIUS authentication against Active Directory credentials for Ruckus Switch

Mayank — Fri, 16 Feb 2024 08:07:15 GMT

Hi Hayed ,

Thank you for posting you query !!!

I understand you need assitance in customizing the vendor specific attribute on the NPS side for Ruckus switch.

You can refer the below link for your refrence :

https://community.ruckuswireless.com/t5/RUCKUS-Self-Help/802-1x-authentication-with-NPS-policies-Windows-Server-2016/td-p/62773

Moving Forward If this issue is not resolved , Please log a ticket with the below link so that we will help you further.

https://support.ruckuswireless.com/contact-us

I hope this information helps you

Please feel free to leave us a message if any concerns

Re: Configure RADIUS authentication against Active Directory credentials for Ruckus Switch

htn — Fri, 23 Feb 2024 03:46:26 GMT

Hi Mayank,

I have lodged a ticket already, but there has been no solution for the NPS configuration side.

I also looked up many documents related to this issue, but they weren't helpful as well.