https://community.ruckuswireless.com/t5/ICX-Switches/Unable-to-SSH-with-RADIUS-to-ICX-after-update/m-p/76095#M5284 <P>Hi, I recently upgraded several ICX 8200s to 1010c-cd1, which went smoothly except for one switch. This happens to be the only switch with a layer 3 license on it. I can no longer SSH to it using my RADIUS credentials, but I can SSH using the local credentials. The error it gives me is my credentials are wrong, check the username and password, but I am 100% certain these creds are correct.<BR />I tried putty &amp; SecureCRT and reloaded, double checked the config to see if there were any changes made to the RADIUS configuration, and I can't find anything. It also appears that dot1x sessions using RADIUS are working.</P><P>I changed this command, where I swapped radius and local so local was first, but that didn't help:</P><P>&lt;aaa authentication login default radius local&gt; to &lt;aaa authentication login default local radius&gt;</P><P>I also removed the command &lt;aaa authentication enable default local&nbsp;radius&gt; because neither local nor RADIUS would work for the enable login (removed this by accessing the SZ CLI).&nbsp;</P><P>I can still manage it from SZ and through local creds so this isn't urgent, but I was curious if anyone else has run into this and had found a solution I'm not seeing yet.</P> Thu, 22 Feb 2024 16:50:38 GMT Sydney_N 2024-02-22T16:50:38Z https://community.ruckuswireless.com/t5/ICX-Switches/Unable-to-SSH-with-RADIUS-to-ICX-after-update/m-p/76095#M5284 <P>Hi, I recently upgraded several ICX 8200s to 1010c-cd1, which went smoothly except for one switch. This happens to be the only switch with a layer 3 license on it. I can no longer SSH to it using my RADIUS credentials, but I can SSH using the local credentials. The error it gives me is my credentials are wrong, check the username and password, but I am 100% certain these creds are correct.<BR />I tried putty &amp; SecureCRT and reloaded, double checked the config to see if there were any changes made to the RADIUS configuration, and I can't find anything. It also appears that dot1x sessions using RADIUS are working.</P><P>I changed this command, where I swapped radius and local so local was first, but that didn't help:</P><P>&lt;aaa authentication login default radius local&gt; to &lt;aaa authentication login default local radius&gt;</P><P>I also removed the command &lt;aaa authentication enable default local&nbsp;radius&gt; because neither local nor RADIUS would work for the enable login (removed this by accessing the SZ CLI).&nbsp;</P><P>I can still manage it from SZ and through local creds so this isn't urgent, but I was curious if anyone else has run into this and had found a solution I'm not seeing yet.</P> Thu, 22 Feb 2024 16:50:38 GMT https://community.ruckuswireless.com/t5/ICX-Switches/Unable-to-SSH-with-RADIUS-to-ICX-after-update/m-p/76095#M5284 Sydney_N 2024-02-22T16:50:38Z https://community.ruckuswireless.com/t5/ICX-Switches/Unable-to-SSH-with-RADIUS-to-ICX-after-update/m-p/76102#M5285 <P>Found the solution for my situation anyway, not sure why but before the upgrade this switch didn't need a static route configured, but after configuring one radius started working again. Before it was using OSPF, so there may be an error on our end for OSPF configuration.&nbsp;</P> Thu, 22 Feb 2024 18:02:31 GMT https://community.ruckuswireless.com/t5/ICX-Switches/Unable-to-SSH-with-RADIUS-to-ICX-after-update/m-p/76102#M5285 Sydney_N 2024-02-22T18:02:31Z