topic Re: ICX 7450 stack question in ICX Switches https://community.ruckuswireless.com/t5/ICX-Switches/ICX-7450-stack-question/m-p/73741#M5109 <P>Hi Brocadester</P><P>Thank you for reaching us</P><P>Reserve state means the member was provisioned on the unit in advance. Once the unit is connected with correct configuration it would come up and show as<STRONG> remote.</STRONG> but if the unit is part of stack you would see role as <STRONG>member</STRONG> , <STRONG>mac details</STRONG> would be displayed , <STRONG>state</STRONG> for member and standby would be <STRONG>remote</STRONG> and <STRONG>comment</STRONG> would be <STRONG>ready</STRONG>. Similar to below example.</P><P><FONT face="courier new,courier" size="2">ID Type Role Mac Address Pri State Comment</FONT><BR /><FONT face="courier new,courier" size="2">1 S ICX7750-48XGF active 609c.9f7f.9400 128 local Ready</FONT><BR /><FONT face="courier new,courier" size="2">2 S ICX7750-20QXG standby 748e.f8f9.6300 128<FONT color="#0000FF"> remote Ready</FONT></FONT><BR /><FONT face="courier new,courier" size="2">3 S ICX7750-20QXG member cc4e.2438.7280 0 <FONT color="#0000FF">remote Ready</FONT></FONT></P><P>I hope this helps</P><P>Thanks&nbsp;</P> Thu, 28 Dec 2023 10:33:09 GMT Chandini 2023-12-28T10:33:09Z ICX 7450 stack question https://community.ruckuswireless.com/t5/ICX-Switches/ICX-7450-stack-question/m-p/73734#M5108 <P>Hi had a question regarding a stack of 4 ICX switches i manage. Is it normal for stacks 3 and 4 to be in a reserve state with a blank comment? Stack 1 and 2 have mac addresses one is local and remote and both are ready…&nbsp;</P> Thu, 28 Dec 2023 00:20:18 GMT https://community.ruckuswireless.com/t5/ICX-Switches/ICX-7450-stack-question/m-p/73734#M5108 Brocadester 2023-12-28T00:20:18Z Re: ICX 7450 stack question https://community.ruckuswireless.com/t5/ICX-Switches/ICX-7450-stack-question/m-p/73741#M5109 <P>Hi Brocadester</P><P>Thank you for reaching us</P><P>Reserve state means the member was provisioned on the unit in advance. Once the unit is connected with correct configuration it would come up and show as<STRONG> remote.</STRONG> but if the unit is part of stack you would see role as <STRONG>member</STRONG> , <STRONG>mac details</STRONG> would be displayed , <STRONG>state</STRONG> for member and standby would be <STRONG>remote</STRONG> and <STRONG>comment</STRONG> would be <STRONG>ready</STRONG>. Similar to below example.</P><P><FONT face="courier new,courier" size="2">ID Type Role Mac Address Pri State Comment</FONT><BR /><FONT face="courier new,courier" size="2">1 S ICX7750-48XGF active 609c.9f7f.9400 128 local Ready</FONT><BR /><FONT face="courier new,courier" size="2">2 S ICX7750-20QXG standby 748e.f8f9.6300 128<FONT color="#0000FF"> remote Ready</FONT></FONT><BR /><FONT face="courier new,courier" size="2">3 S ICX7750-20QXG member cc4e.2438.7280 0 <FONT color="#0000FF">remote Ready</FONT></FONT></P><P>I hope this helps</P><P>Thanks&nbsp;</P> Thu, 28 Dec 2023 10:33:09 GMT https://community.ruckuswireless.com/t5/ICX-Switches/ICX-7450-stack-question/m-p/73741#M5109 Chandini 2023-12-28T10:33:09Z