topic ICX8200 / ICX7150 switches show offline in SmartZone on regular basis in ICX Switches

ICX8200 / ICX7150 switches show offline in SmartZone on regular basis

dawidku — Thu, 14 Dec 2023 13:04:17 GMT

Did anyone had an issue where switches would show offline in SmartZone while actually being online/reachable on the network?

When this happens I delete the "offline" switch, it appears in default SW group as online and I add it back to the relevant group. All switches and SmartZone are in the same physical local network, no remote connection to SZ etc.
This happens to a few switches a week so quite frequent and annoying.

Can anyone advise?

Re: ICX8200 / ICX7150 switches show offline in SmartZone on regular basis

Chandini — Thu, 14 Dec 2023 13:36:22 GMT

Hi Dawidku

Thank you for reaching us

When you notice the switches show offline on the SmartZone check the below details from the switch.

Show sz status
Show sz logs
Show logging

You can try the below commands to check if that helps resolving the problem from switch side

manager connect
manager reset

If you still see the problem occurring then If the State in "show sz status" is connected then please log a case with SmartZone and if you see that the State is in Query or Init then please log a case with switch serial number.

Please use the below link to log a case with us.

https://support.ruckuswireless.com/contact-us

I hope this helps

Thanks

Re: ICX8200 / ICX7150 switches show offline in SmartZone on regular basis

dawidku — Thu, 14 Dec 2023 14:42:01 GMT

Thank you for quick response

I will check this next time issue occurs and will follow up accordingly with Support Team.